hasoon wrote:The Ren24 firmware has a default baud rate of 57600. Try slowing it down and see if that makes the ren24 work. This worked. I have no i...
ctmal wrote:Here's the troubleshooting guide. I did notice a typo in my suggestions: Step 3 should be set the renard plugin for channels 1-24. Sor...
ctmal wrote:Did you try any of these? If so, what were the results...they may help narrowing down where the issue is. The only thing I did not do ...
I used vixen 2 during Halloween and am using it now as part of the setup, while planning to use vixen 3 for the actual show. But everything I am doing...
I havent been able to turn on a single bulb with my controllers in 2 weeks. Looks like no show this year 🙁 Tha ks for the suggestions. Im going to l...
ctmal wrote:This might be the issue....I don't know the details of the px1 but I do know that the renard pinout has been pretty much standardized for ...
Wayne J wrote:Why did you reflash the PX1 PIC to connect to a SS24? Have you tried the S24 on its own? I wanted to set the pixel group to 1 which I'...
Javo wrote:This is interesting. I am also running SS24's, 64XC's and a PX1. I was under the impression the PX1 couldn't be daisy chained with my oth...
Ok great thanks!
Wayne J wrote:Just to be sure, try pulling the MOC to that channel, but the triac is most likely the culprit. Alright, that may be the easiest fix. ...
Ughh damn. I don't have time for this kind of stuff. I'll wait till after I take the unit down to replace the triac. I'll leave it alone for now, may...
