For 2 lead parts you can reheat each side and rock the part into place, for multi pinned parts (sockets,etc), Solder the opposite corners of the part,...
I need to make a recording of this years show but its raining today If it doesn't rain tomorrow I will make one of just the tree for you. Carl
I have 2 - 8 channel 4 foot spiral trees made with 100 count white LEDs twisted back on themselves, and wound around the 4 ft tomato cages. They look ...
Since the 12volts is too low, I think LightUps diodes in series with the 24VDC is a good idea to see about what voltage you will need. 8 would be a go...
I think the problem is the duty cycle of AC vs. DC on the LEDs. Without a full wave bridge in the circuit, the 24VAC will have something just under 50...
I found several years ago that the lights would randomly come on with the computer off. I put the terminator jumper on the board (J2 I think) and it h...
I haven't looked up the H bridge to see if it has protection against having both inputs high and shorting the AC. The simplest control for both colors...
I like to use one of the larger spring loaded Soldapullit. It gives you more vacuum. You don't want to cut the pins off or they will get sucked in. C...
1: What would you want the Transmitter to respond to? Raw Serial, DMX, or Renard protocols? Renard initially, and DMX sometime in the future 2: Is com...
It's interesting that the numbers after the first one alternate positive and negative and are all multiples of 50. Carl
Lately I have been running Microsoft Security Essentials on all my windows based machines. It doesn't seem to slow the machine down, and it's a free d...
Payment sent. Thanks, Carl
I would like 4 units. thanks, Carl
Since NRZI is geared more for a continuous data stream, your last bit will determine weather the IR LED is on or off at the end of the data packet. Le...
I can see this becoming a Renard or DMX compatible board that decodes 8 or 16 channels and sends the 2400 baud out several pins to drive the IR transm...
