If anyone has info on the jumper questions I still have not soldered them. I'd like to know before going forward. I will just be running this off of ...
No - I am powering it with a car battery
OK - maybe I figured it out. I had not thought this far ahead yet. I am assuming the teminal blocks along the front of the board are for the neutral s...
Hey guys I came across a question while putting my 24hc together. I got to the point where the instructions say to install jumpers. 1st I am assuming ...
Carpenter- I took your advise and did away with as much cross over as I could. I added beads on power input wires, coax to antenna and added another ...
warrior - sorry the pics are small. I took them with my phone and I somehow resized them. I can take a couple more if someone wants to see something ...
Update. I tried a couple things this morning. First I moved the antenna off the wall a couple feet (kinda suspended). It made a little difference. So ...
Ya I would be more than happy with that range if it were not for the static and fade.I am having that problem at 35 yards from the house. It is a coup...
Well I tried it. It worked but not real well. Quite a bit of static and the signal faded in and out as I moved (in my truck) away from my house. I was...
Yes- thanks to Idunbenhad also. Read thru the entire thread that was referenced and that's the direction I am going.
Oregon- I like the looks of your setup. Very imformative thread. Thanks. I would like to go this route but I would need to run audio line from compu...
I certainly don't know but reading about building the dipole I believe it has been suggested that the foil/braiding of the rg6 is difficult to separat...
If I find a length of rg59 long enough to build the dipole can I splice in rg6 with connectors and run that for the rest of length I need to get back ...
