baboiler
@baboiler
Estimable Member
Joined: Aug 19, 2011
Topics: 29 / Replies: 98
Topic
Forum
Replies: 10
Views: 13122
Reply
RE: Initial testing of Ren 24hc....Please advise

Thanks for the advise guys. Lunitic - I will try to reference the pdf you posted. I had not been looking at that one because it looked like a schema...

14 years ago
Forum
Topic
Forum
Replies: 4
Views: 1803
Topic
Forum
Replies: 0
Views: 1031
Reply
RE: spot I am concerned about Ren24hc

kychristmas - thanks for the pointers. I didn't think I bought lead free solder but I would have to double check. From reading on here I knew I wanted...

14 years ago
Forum
Reply
RE: spot I am concerned about Ren24hc

Thanks amps. I really didn't want to mess with this spot anymore.I am afraid of screwing it up worse.

14 years ago
Forum
Topic
Forum
Replies: 9
Views: 3043
Reply
RE: bump four help on my ren24 hc........

I was mistaken about the shunts. They are two place shunts not three. My apologies guys. So I think I know what I need to do now. I put one under ma...

14 years ago
Forum
Topic
Forum
Replies: 2
Views: 1903
Reply
RE: bump four help on my ren24 hc........

Looking at the pic on the wiki of the 24hc board it looks like the builder used a piece of wire to do the jumpers. My shunts do have 3 internal slots ...

14 years ago
Forum
Reply
RE: bump four help on my ren24 hc........

I'll have to look again.I thought the shunts I got head 3 slots

14 years ago
Forum
Reply
RE: bump four help on my ren24 hc........

Installing the shunts is my question i guess. I have the jumper inserts soldered to the board (3 straight metal pegs sticking up). The shunts are plas...

14 years ago
Forum
Topic
Forum
Replies: 9
Views: 3022
Reply
RE: Renard 24HC kit discrepencies from instructions

so black stripe and short lead AWAY from "+" symbol on silkscreen. Thank you very much!

14 years ago
Forum
Reply
RE: Renard 24HC kit discrepencies from instructions

now I have questions on every step. Went thru the first half of the board pretty good. I guess that is the way it goes on your first board. Anyway - ...

14 years ago
Forum
Page 5 / 9