Not sure if this means anything or not but when I plug the board in one strand of lights quickly flash on then off. Output #7 I believe. I can't think...
vixen - yes i did look at that. I will look again. They all had a check next to them
Also the power light and all of the other led lights on the board itself work. As a sequence is running the four on the top turn on periodically. I do...
I applied power to the left side and used the jumper. I think I have the shunt for the transformer in the right location per the wiki . Can I switch i...
crv - I don't have any info about floods but I was wondering if you did any diagnostics on your 24hc yet. I have just finished my first one and am at ...
No I have not had time to finish the board output lines yet. I have a bad feeling it is not going to work and I was hoping someone could see the pictu...
I uninstalled pickit software I had loaded and started all over. Reloaded everything and followed the step by step referenced above. Everything goes a...
Thanks for the help waynej - I appreciate it. I'm at work now so I will try those things later tonight. Hopefully that will solve it for me!
waynej - Sorry for my struggles with this but I must have something wrong. I insert pic in slot. I open pickit software. The device is not reconized. ...
I guess while I'm clogging up the board with silly questions I'll ask another. : ) Once I imported the hex I noticed in the large square box that alo...
If I select read device first , then import hex and write it seems to work and it verifies it. I suppose the only way to know if I really have them pr...
Alright I downloaded firmware from wiki and created a folder in"C" as suggested in video. Finally found the 16F688 for the device. I imported the .hex...
Found MPASMWIN . Thanks waynej !
