My first print would not start the thread. Not sure of the issue just yet. 2 different bases, one bulb in PLA, the bulb would not thread into either b...
Definitely an ID 10 Tee problem, or shortened ID10T.
Wow, thanks for the update. I very much appreciate it! You have taken this project so far. It is amazing what you have accomplished.
So your modifing the print speed on the fly? Care to share your slicer file? Also, Is there a file to close the hole on the top? Mine will be mounted ...
I have made foam cutters for my RC airplane projects. Your best bet is a high current ~10 amp variable voltage supply. Some people use a fixed supply ...
I reccomend using a cable reel for the base ring. They are available from telecom companies in most any area. They are quite strong/unbendable square ...
Are you using earth ground on you power supply? I.e the green wire on a 3 prong plug.
I think the bulb is a much better fit than the globe. Thanks for the info though.
Nice, I was looking for some light toppers for my tune to sign pvc stand posts. This might be just the thing. I did find it on thingiverse. Are all th...
Website: Email:Ray Wu: ray@rita-light.com Make sure you email him for a shipping quote, as it is always a better deal than purchasing off aliexpress ...
I doubt the wet sponge was the issue. Been using a wet sponge for 40+ years, never had an iron fail.
Way to go! Glad we all could help you get it going so quick. Now the real task, sequencing.
Corrosion X spray works real good also inside the plug before assembly. Kind of a liquid dielectric.
Some on low power still exceed FCC limits for our use. A model # would have been useful. A good rule of thumb, it your clear audio exceeds about a blo...
Thats how mine looks, and if I look at the s numbers it ends on string 6 and I am using 3 ports from the controller to drive 24 strings. I have never ...
