They do have an archive of old IDE downloads...I just needed to download 8.92 to get FAST asm to compile. If not for others, for my own record:
Downloading now...thanks Vixen team!
Got mine, but have not been able to open yet! Thanks!
James- My order came in yesterday but I won't get to open it until the weekend. Hopefully Sunday. Thanks for doing this for us!
Thanks Mr. James!
4x PX1 kits with PCB Sent money via PayPal Thanks!
James: DIYC user: aggiewonder 2 x Renard SS 24 BOM 10 x BTA06-600CW's 2 x Renard SS 24 PCB 2 x Renard SS 24 Heat Sink Thank you!
IpsissimusMarr: Those amps are DC...at 12V. Draw on the AC side (120Vac) will be lower than on the DC side. Check the input power requirements for ...
Yes, I believe that is the file I used. Will check tonight.
Hi Wayne. 40W. Fine tip. Label is off of the solder so I don't know the diameter. I replaced Ch. 1's triac but seems to be stuck at 100% or 50% d...
Two "suspect" triacs have been eliminated. Test firmware was used to test each channel (1-8) individually with only one optoisolator installed at a t...
Channel 1 was tested with one 100 count strand of lights. I will do more testing and see if two strands makes a difference. The other channels have ...
Interesting read: RE: Testing--> "How can I test my SSR? It is not possible to test an SSR by the same methods used to test mechanical relays; a ...
I agree...but I sure can't find it! At least Channel 3 works with a string of lights! Yay!
