Sorry to hi-jack the thread, I'll make it quick!
Matt, can you offer any pointers on using Durafix? I bought some because I like to work with aluminum but don't want to spend the money on a nice tig welder. I can't, for the life of me, get the stuff to work consistently. Thick pieces of aluminum are relatively easy, but I've had no luck with small stuff. By small I'm talking 1/8" 'wire'. I clean everything well, but seem to struggle with heat. It's always either too cold and won't get the Durafix to flow, or too hot (Happens very quickly) and starts to melt the aluminum. This is with a MAPP gas torch with somewhere around a 3/8" tip on it. Any help would be appreciated!
Back to the OP, do you have any friends with a small wire feed welder? I bought mine at Home Depot for like $250 and it works great for anything up to about 1/4". Everybody has at least one friend with a welder, right?.... 🙂
n_gifford wrote:
Back to the OP, do you have any friends with a small wire feed welder? I bought mine at Home Depot for like $250 and it works great for anything up to about 1/4". Everybody has at least one friend with a welder, right?.... 🙂
I decided to buy a wire feed welder to. Found one on Craigslist for about $50. Works great on 1/4" rod. I had never welded any thing before and it have made a few snow flakes and stars for mini trees. If you can find one cheap I think it is the way to go.
imbluenote wrote:I decided to buy a wire feed welder to. Found one on Craigslist for about $50. Works great on 1/4" rod. I had never welded any thing before and it have made a few snow flakes and stars for mini trees. If you can find one cheap I think it is the way to go.
They are nice for many things, even if you're not a professional welder. I've had my DC stick welder for years, but it doesn't do well with small material, so I finally had to break down and buy an inexpensive 110v wire feed for odds and ends around the house.
So far I have had good luck with a putty type product called Tech Steel...You can find it for like $10.00 in automotive stores..It's made for filling in small holes in metal..You can sand it,paint it etc...It holds really well so far for my wire frames that have split over the years...Hope this info helps...Another product found in the plumbing isles at home depot etc is called Fix-it - stick..It's an epoxy putty you kneed to mix..It will attach steel to concrete without an issue and be strong..I plan on using this for attaching hooks to the under side of my balcony for attaching lights etc....
whats the best way to mount the lights to the wire frames so the shape and definition of the wire frame is shown best rather than look like a cluster of lights. I am wanting to build mini stars and wrap
a 50ct string of LEDs on them just not sure how to approach this
The way I did mine was to simply lay them flat.Figure out the direction of the bulbs ( for c6 or c9 or even mini leds) then what I did was use white zip ties and white electrical tape to hold the lights in place.Mine have been that way for 2 years and not one light has moved...Just remember each one has a direction of view...When you put the lights on make sure that view is up and facing you...
Warlock wrote:The way I did mine was to simply lay them flat.Figure out the direction of the bulbs ( for c6 or c9 or even mini leds) then what I did was use white zip ties and white electrical tape to hold the lights in place.Mine have been that way for 2 years and not one light has moved...Just remember each one has a direction of view...When you put the lights on make sure that view is up and facing you...
wow alot of zip ties are going to be needed but might just work.
You might want to order as few 1000 zip ties for that project:)
http://www.monoprice.com/products/subdepartment.asp?c_id=105&cp_id=10520
