Wireframe without a...
 
Notifications
Clear all

Wireframe without any welding? Possible?

18 Posts
12 Users
0 Reactions
12 K Views
Posts: 5
Topic starter
(@cheval22)
Active Member
Joined: 14 years ago
[#20993]

Hi,

I'm actually new to wireframes and I would like to build my own custome one. I do not own a welder so I was wondering if there was a way of doing wireframe without welds?

I got some LED strips and I'm looking for a way to place them, that's why I thought of the wireframes. Any other ideas is welcome!

Thank you very much!


17 Replies
Posts: 295
(@billad)
Reputable Member
Joined: 19 years ago

If the wire guage is not too thick you should be able to use a mapp gas torch with brazing rods. Here is one example: http://www.homedepot.com/h_d1/N-5yc1v/R-202185045/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=torch&storeId=10051

Bill


Reply
somtng4u2c
Posts: 557
(@somtng4u2c)
Prominent Member
Joined: 18 years ago

You might get a hold of dougp on here as he makes wire frames for customers all the time.


Reply
crazy_carpenter
Posts: 369
(@crazy-carpenter)
Reputable Member
Joined: 15 years ago

Check with Matt_Edwards. He recommended this product to me. http://durafix.com/ I haven't tried it yet but he seems to like it.


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

I used 1/8" wire for my wreath and quickly learned I lack way too many skils to Stick weld this gauge even with 1.5mm sticks (all I had at the time was a stick welder)
So I ended using 14" lengths of 18gauge wire to wrap two joining ends on the frame togeather. Once I was happy with the overall shape, I applied Durafix to the joint, and when it hardened the frame no longer slipped or moved.
bear in mind if you go this way, you joints will be bigger and thus needs to be considered when designing your frame.

My weather is 3' diameter so it is not a small structure.


Reply
Page 1 / 4
Share: