Wireframe without a...
 
Notifications
Clear all

Wireframe without any welding? Possible?

18 Posts
12 Users
0 Reactions
12 K Views
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

The way I did mine was to simply lay them flat.Figure out the direction of the bulbs ( for c6 or c9 or even mini leds) then what I did was use white zip ties and white electrical tape to hold the lights in place.Mine have been that way for 2 years and not one light has moved...Just remember each one has a direction of view...When you put the lights on make sure that view is up and facing you...


Reply
griffixdc
Posts: 2512
(@griffixdc)
Famed Member
Joined: 16 years ago
Warlock wrote:The way I did mine was to simply lay them flat.Figure out the direction of the bulbs ( for c6 or c9 or even mini leds) then what I did was use white zip ties and white electrical tape to hold the lights in place.Mine have been that way for 2 years and not one light has moved...Just remember each one has a direction of view...When you put the lights on make sure that view is up and facing you...

wow alot of zip ties are going to be needed but might just work.


Reply
kingofkya
Posts: 2165
(@kingofkya)
Noble Member
Joined: 15 years ago

You might want to order as few 1000 zip ties for that project:)
http://www.monoprice.com/products/subdepartment.asp?c_id=105&cp_id=10520


Reply
Page 4 / 4
Share: