I'm interested in building some wireframes this year, and want to buy a welder. Can you guys post links to the material you use to build your wireframes with? I've seen mentions of 1/4" rod from some.
I was leaning towards this inexpensive welder, but not sure it's up to the task.
-=Steve
I've been using 3/8 rebar. Only reason is because I can get it around the corner at HD. That welder is fine, it is the one i use. Their instant on helments are decent too for $40 bucks. Only advice about that unit is after you use the roll of wire that came with it is to buy Lincoln wire at HD. It is better quality and actually cheaper than the HF junk. Just my 2 cents as a self taught hobby welder.
I use a wire feed craftsman (similar unit) and 1/4" steel rod. It was my first time welder and works fine. 3/8" as crazy carp mentions would work too but my guess is you have to work on each weld a little longer making the process longer to not exceed the duty cycle on the unit (i've made it shut Down using 1/4" rod)
The HF welders are fine for light duty like we use. However, I would STRONGLY suggest you purchase a welder that can use gas. Welding with gas is much easier, cleaner with far superior looking welds. Believe me - I learned that one the hard way..........
Also, IMO, 1/4" hot rolled is the cheapest and easiest material to use for Wire Frames. Find a local steel supply shop and you can usually buy 20' sticks for around $3.00 (or less). (they will cut it to 10' lengths for ease of transportation if you ask, they are used to it) Much cheaper than buying at one of the home stores.
rstehle wrote:The HF welders are fine for light duty like we use. However, I would STRONGLY suggest you purchase a welder that can use gas. Welding with gas is much easier, cleaner with far superior looking welds. Believe me - I learned that one the hard way..........
Also, IMO, 1/4" hot rolled is the cheapest and easiest material to use for Wire Frames. Find a local steel supply shop and you can usually buy 20' sticks for around $3.00 (or less). (they will cut it to 10' lengths for ease of transportation if you ask, they are used to it) Much cheaper than buying at one of the home stores.
+1 I too learned the hard way and would not even go back to the flux core wire. The gas shielded welders are worth every penny. I got the Harbor freight 220 volt one and it has been a good little welder.
rstehle wrote:IMO, 1/4" hot rolled is the cheapest and easiest material to use for Wire Frames.
What exactly is 1/4" hot rolled? I'm imagining a rod that is 1/4" thick and that sounds WAY too heavy/thick. Is it really 1/4" in diameter?
rstehle wrote:I would STRONGLY suggest you purchase a welder that can use gas.
I've seen people say this, but what does that mean? Do I need to have a tank of some gas connected to my welder? I'm a potential customer for Harbor Freight, but all I see is that I can "add gas later". I'm a complete newbie with welding, but I'm the type of person who likes to buy quality tools. If everyone suggests the best way to weld is to "use gas", why don't they sell a complete setup with gas? It seems like folly to expect someone who has never welded before to buy a welder AND a gas optional add-on...put it together and use it without killing myself. I am pretty worried that I could hurt myself if I don't ground it correctly...or if I touch something while I'm welding.
I don't expect I'll be doing a LOT of welding, just building some tree or snowflake shapes as a wireframe for my christmas lights. How important is gas for this type of use?
-=Steve
THurrle wrote:I got the Harbor freight 220 volt one and it has been a good little welder.
My house was built in 1922. The only 220v outlet I have is for my dryer (and oven). So I'm limited to something that can run off standard 110v power...right?
Yes 1/4" is the diameter. Cold vs hot rolled is how it is made one is formed while it is hot, cold is allowed to cool before forming. The latter had better tolerances dimensionally.google hot rolled vs cold rolled. Personally I have used both and not seen a difference, cold is usually more expensive though.
"Gas" they are refering to is TIG or MIG welding where there is a shielding gas. Harbor freight does selle them. I think they start at upper $100 low $200 if memory serves. For me, not saying I never will, but aside from the wire frames I have welded one thing so far. The flux core wire welder is good enough for me and I am satisfied with the results. If you do plan on doing other welding you do want a TIG or MIG welder.
1/4" hot roll is the way to go. Unless building a really large frame that needs more support, then use 3/8". hot roll will bend easier. Cold roll tends to get harder when worked. Cold roll is probably "stronger" than hot roll, but it is only supporting lights.
Most common clips to hold lights to frame are 1/4" too, though others are available.
And wire feed with gas is the best, though i usually end up using stick rods because its quicker to set up.
szaske wrote:I'm interested in building some wireframes this year, and want to buy a welder. Can you guys post links to the material you use to build your wireframes with? I've seen mentions of 1/4" rod from some.
I'm not sure if this is the type of wireframe you are interested in, but I use ~ 18 gauge fencing and duct tape for very light weight but quite sturdy wireframe props:
http://downloads.eshepherdsoflight.com/Howidid-NativityFigures.pdf
don
