Welder, now what?
 
Notifications
Clear all

Welder, now what?

29 Posts
19 Users
0 Reactions
13.6 K Views
Posts: 68
 thg
(@thg)
Trusted Member
Joined: 17 years ago
Wayne J wrote:Galvanized material IS BAD STUFF to weld on. It is very toxic!! Make sure you have good ventilation and certainly do breathe ANY of the fumes if at all possible!!!
Sorry if I seem critical about this but it is just that bad.

James I think you forgot the NOT in your statement

Thomas


Reply
DIY Guy
Posts: 542
(@diy-guy)
Honorable Member
Joined: 17 years ago

Always use ventilation when welding.. period. They are starting to correlate welding with Parkinson's disease.

I had a neighbor who owned a welding shop. He was a brilliant guy (a lot like the people here). He liked to build and tinker (steam engines, old motors, even designed his own solar collection system). Gradually he succumbed to Parkinsons.. it was one of the saddest things I have seen. Such a brilliant guy but when I went over to see him he couldn't get the thoughts in his head to come out of his mouth. The frustration in his eyes was heartbreaking.

So, please, regardless of what you are welding. Do it outside or with plenty of ventilation.

Tim


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago
thg wrote:James I think you forgot the NOT in your statement

Thomas

Thanks, I will learn not to post until I finish my first coffee. 😆

Wayne


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago

When I weld with the gas mig, if the metal is rusty or galvanized coated I grind off the spot to bar metal that needs to be welded.


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

To pile into the thread which mig with gas welder to buy for wire frames, mega tree frames, rebar etc?

Sent from my Sony Tablet S using Tapatalk


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago
arw01 wrote:To pile into the thread which mig with gas welder to buy for wire frames, mega tree frames, rebar etc?

Sent from my Sony Tablet S using Tapatalk

Do you mean which Brand?


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

Model would be better, brand can vary from item to item. I've read a few threads on welders on the forums and there doesn't seem to be a "safe" bet like buying a Weller professional soldering iron station is on welders.


Reply
mikentn
Posts: 912
(@mikentn)
Noble Member
Joined: 17 years ago
Reply
Posts: 84
(@kk4pvz)
Trusted Member
Joined: 12 years ago

i perfer mig to tig unless im doing stanless steel or alum. then i would use a tig.. mig is great for what you want to do. i have a 195amp mig i got from tractor supply along with the gas for it. around 300 dollars.
li can weld most anything i want to.. by changing gas and wire can also weld alum.


Reply
Page 3 / 3
Share: