Quick question....for those of you using 12mm pixels on your wireframes. Are you laying the pixel on its side and zip tying them so that the viewer sees the pixel from the side? Would you rather mount them so the pixel faces out?
Last year I outfitted 4 Sally trees with WS2811 bullets, laying them on their side and zip tying them on.
This worked, but I wondered if I could turn them and face them forward, how much of a better view they would have been.
Do I feel a new type of clip coming on, with this request?
algerdes wrote:Last year I outfitted 4 Sally trees with WS2811 bullets, laying them on their side and zip tying them on.
This worked, but I wondered if I could turn them and face them forward, how much of a better view they would have been.Do I feel a new type of clip coming on, with this request?
A knockoff pixclip id guess, without using a flexible filament im curious the method going to use to keep the clips from sliding along flat stock. The big perk to the pixclips is the uv semi flex material
It's fairly easy to get a snap fit. Tested on 3/16 round stock and it doesn't move. Flat bar would be similar. If they last as long as my store bought clips..I'm happy. I'm also not going to copy the pixclip. Hopefully someone will start selling the pixclip again...otherwise that handy dandy flexible UV plastic ain't going to do you much good.
Sent from my LG-H811 using Tapatalk
Ive been wondering what to use, also. I've even considered pipe straps.
Drilling holes in pvc.
1" x 1" wood strips.
What have y'all tried?
Sent from my iPhone using Tapatalk
