Grid 18x16 pixels -...
 
Notifications
Clear all

Grid 18x16 pixels - correct patching - please help

5 Posts
4 Users
0 Reactions
2,183 Views
Posts: 35
Topic starter
(@dvjcodec)
Trusted Member
Joined: 11 years ago
[#41078]

I was build a grid with 18 pixels horizontal and 16 pixels vertical.
I have a problem with prop patching 🙁
This is my installation, please help with correct settings.

grid 18x16

4 Replies
Posts: 86
(@markrvp)
Estimable Member
Joined: 19 years ago

I would Zig Zag. You can set up your controller to Zig Zag every 16 pixels, or if you have xLights you can make a horizontal matrix with 9 strings of 32, 2 strands per string.


Reply
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

If your grid is wired as shown in the diagram you shouldn't have any trouble patching the prop to the controller. On the setup page just choose your element (prop) then choose the controller and hit the patch button. No zig-zag or anything else is necessary. It might be helpful if you could post a screen shot of your setup page.


Reply
Posts: 35
Topic starter
(@dvjcodec)
Trusted Member
Joined: 11 years ago

Does it matter which way I start draw grid in Vixen3?


Reply
Posts: 47
(@hilightsmt)
Trusted Member
Joined: 11 years ago
dvjcodec wrote:Does it matter which way I start draw grid in Vixen3?

I have the same question. Thanks for the replies!


Reply
Share: