It seems that Vixen can't keep up with the effects I have sequenced for some parts of a sequence. For example, I have some arch chases that last .43 seconds. Can the refresh interval be changed at all?
In the main vixen window, there's an option for update interval. The default is 50ms you can increase this to see if it helps. But 50ms is .050s. So it should have updated 8 times for your .43 second chase.
The update interval isn't fixed in stone. It's just a target. It can vary a few ms either way.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
I assume you're talking about those V shaped chases on your arches. It looks like you added pixel arches this year. One thing to note is that if the overlap value is longer than the effect duration that it will not create the effect. This would be what's happening if you see a blank box in the timeline where the effect should be. How many pixels are in those groups? it looks like a lot. At 50ms refresh, there's only about 4 updates in each half of your V. So what you'd see on the arch is that it would only chase in 4 sections. (speaking in very basic terms). In order for it to actually get them all you'd have to decrease the update interval value. But that's in theory only. Just looking at what I can see on your screenshot, you're not going to be reduce your update interval too much without seeing big performance problems. Reducing below 50ms is really only an option for the smallest and simplest shows. (<100 channels maybe) Yours is definitely well into the mid range.
All that being said, your eyes really can't see anything much faster than 33ms anyhow. (about the same as 30fps video frame rate) The 50ms default is just a tad slower than the standard film frame rate used in movie theaters.
So if you're missing steps in your chase, the answer might be to lengthen the overlap to make sure that each pulse of the chase is on longer than 51ms.
For comparison purposes, I have a series of effects in one of my sequences that's working just fine. Mine are wipes but are very similar. These are .71s long, and the pulse width is 50%. So that makes each individual pixel pulse .355. There's 66 pixels in my arches.
I also see missing parts in those chases in the rendering. That tells me that it is missing parts of the data because the pulse length is to long compared to the effect length and number of elements. See those broken bits in there? They are more obvious in the white ones, but the blue ones have it to. You want that drawing to look clean. Spread the row out taller and zoom in to get a better look at it and adjust the effect until it is clean. If you are missing data points because the algorithm fails it will look choppy in addition to the points Jon made above.
Jeff

