Adding Controller t...
 
Notifications
Clear all

Adding Controller to Vixen 3

3 Posts
2 Users
0 Reactions
2,877 Views
Posts: 7
Topic starter
(@daniel1973)
Active Member
Joined: 12 years ago
[#35056]

Hi All,

I am very new to the joys of Christmas lights. I am playing around with vixen 3 with the use of many you tube uploads.

I am wanting to add a controller( looking at SanDevices E682) however unsure of the outputs on this controller. On one You tube I saw they added 3000 using E682, however when I do this
Vixen crashes and closes down.

I am just trying to patch and see what a show would look like ( For next yr.

Many thanks and seasons greetings.

Daniel


2 Replies
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

One of the main purposes of the vixen 3 project is that you don't need to worry about patching and controllers and hardware until well after your elements are laid out and you've gotten your feet wet sequencing on them.
When you build a house you don't start by laying out the outlets and the wall switches and plumbing. You draw the house first and figure out what the rooms are shaped like. Then you fit the utilities into the plan to fit.
The same process applies here. (Assuming you're starting from a blank slate) figure out what lights you want to put up. When you're getting started, you want to think about your lights and props. That's your starting point. Where do you want strings, megatrees, etc? Create those elements. Draw a preview. Start playing with them in the sequencer. See what you can do with them. Then adjust your strings and pixel counts and such as you see fit. Once you have a final plan on what's going where, only then do you have a list of what needs to be controlled. Then you can pick your controllers to fit. It's really smarter to lay out the lights and such first and then figure out what controllers you need to buy. Along the way do your research on the wiki here. There's lots of gotchas when you're working with pixels that are better off handled with up front planning and research. If you wait till you start hanging lights in November only to find out you need pixel extenders and power injection, you'll be in a world of hurt trying to find last minute custom parts. Then after you know what your layout will look like, you can then start choosing controllers and such and figuring out how you want/need to wire it up. Then you can add those into vixen and start patching.
You certainly can add a controller with many more than 3000 channels. I routinely drop in controllers with 20,000 channels or more for testing purposes. A single 682 will support up to 6120 pixels (I think) but unless you're doing a high density pixel prop like a megatree, you probably won't come close to that. I have about a dozen pixel controllers in my display and I think the densest one is less than 2000 channels.
It's also important to point out the system requirements for vixen. They're listed in the intro section of the vixenlights website. This program takes some serious computer power for pixel heavy shows. 3000 is ambitious for a year one. Most people get their feet wet with a few hundred. That's a good way to learn all of the basics of pixels. You are getting a good start with a 11 month lead time to lights on. But there's lots of ordering and waiting months for shipping and building and ordering what you forgot. That chews up year one really quickly. Also, don't underestimate the costs. A 1000 pixel startup show could easily be in excess of $2000. It could be less depending what you're starting with, but if you end up having to buy everything because you're really just getting started into electronics, it really adds up. Take it slow, ease yourself in, hang on to your wallet and enjoy the ride.
To directly answer your vixen crashing issue, it's really not worth troubleshooting yet. Vixen is a program in constant active growth. What you will use next season will look a lot different than it does today. I can tell you already that there's big changes that are already almost complete for the sACN controller module. So don't stress yourself trying to figure out today's module. If you want to get your feet wet, Try to add the controller with 170 pixels, or 510 channels. That should work on almost any system.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 7
Topic starter
(@daniel1973)
Active Member
Joined: 12 years ago

Jon,

Thankyou for your prompt answer, a lot of help. Yes looking forward to the journey, and only dipping in a toe at the moment.

Daniel


Reply
Share: