Multiple Mega Tree ...
 
Notifications
Clear all

Multiple Mega Tree Issue

5 Posts
3 Users
0 Reactions
2,953 Views
Posts: 99
Topic starter
(@kingjesse2)
Estimable Member
Joined: 11 years ago
[#53397]

Hey Everyone,

I am having an issue with my mega trees (they are actually mini-trees, with 10 strips of 20 pixels on each). I have these 4 trees connected to an AlphaPix 4 controller, and all are power-injected. They are each set up as their own universe, with 200 pixels in each:

Screen Shot 2020 12 03 at 11.53.17 PM

I set up the trees in Vixen, and directly mapped them to the controller with all 2400 patch points.

Screen Shot 2020 12 03 at 11.53.39 PM

For some reason, everything seems to work except for the second to last universe. The last one works, and the first 6 work. I have no idea why. The 7th universe sends color, but it's just static and doesn't move. It's rather odd. Anyone have any ideas?

Oh, and if I swap the universe numbers from the 1/2 and 7/8 lines in Vixen, a different output starts to not work properly. I also ran tests from the controller itself, and all the trees/pixels received the proper colors.


4 Replies
Posts: 752
(@popo-b-trippin)
Prominent Member
Joined: 13 years ago

I don't know this controller, and the screen shot doesn't indicate... Each tree would need 2 universes, which is properly setup in Vixen. Does your controller indicate somewhere that it is using 2 universes for each output?


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Sounds like a patching issue in Vixel or your sequence is not applied to the elements properly.


Reply
Posts: 99
Topic starter
(@kingjesse2)
Estimable Member
Joined: 11 years ago
Popo-B-Trippin wrote:I don't know this controller, and the screen shot doesn't indicate... Each tree would need 2 universes, which is properly setup in Vixen. Does your controller indicate somewhere that it is using 2 universes for each output?

Well, all of the outputs from the controller seem to work fine somehow, the only setup of outputs and universes are in the picture I attached. Supposedly, they automatically rollover to the next universe once they pass 510. The first three outputs work perfectly and the 4th is the one with the issues. But when I swap the universe numbers around in Vixen, the 4th output works perfectly and a different output stops working. This leads me to believe it is something in Vixen, but all 4 of the Mini-Trees are set up identically...


Reply
Posts: 99
Topic starter
(@kingjesse2)
Estimable Member
Joined: 11 years ago
MartinMueller2003 wrote:Sounds like a patching issue in Vixel or your sequence is not applied to the elements properly.

Agreed, but I'm not sure what to look for. In the preview screen, all 4 trees have the exact same number of pixels, all the trees have the same number of outputs, and all are mapped the same in the controller. Just for some reason whatever I put in Universe 7 doesn't seem to want to work. I tried completely recreating the controller, and the tree, with the exact same issue occurring.


Reply
Share: