Just checking to see if my PC is powerful enough to run my show, at least for this year. This is a computer that I built to run PVR software when I used to record my own TV. Since I no longer do that anymore, I've decided to re-purpose this computer for Vixen. I just wiped it out and installed a fresh copy of Win7. I didn't realize this PC was this old until I dug into my Newegg history to get the specs. It was built in late 2009. For the time, it was a pretty good PC.
Here's the specs on the PC:
Windows 7 32 Bit
Intel Core i5, 2.66Ghz
2GB Ram DDR3 1066
Here's what my light show consists of:
Vixen 3
SanDevices e682
(12) 5m strips of 2811 LED, 10 pixels per meter, 600 pixels total
(2) 100 pixel strings, 200 pixels total.
Is this PC up for the task?
Also, since we're criticizing my setup, here's how my network is setup:
PC>GB router>~80' Cat5 run to entertainment center>10/100 switch>~20' Cat5 run>e682
Any foreseeable issues with the PC or network?
Ya totally.
Good to know! I was a bit concerned about only 2GB of ram. I could drop a couple more sticks in but then I'm faced with upgrading to 64 bit.
You should be ok. But it depends on how many sequences you plan on including in your schedule. An extra $30 or so to max out your ram will help if you find rendering your schedule to be slow or running out of memory. You should have no problem working on your sequences. But when you go to play a scheduled show it has to render all of those sequences into memory before it starts playing. That's where your bottleneck might show up.
On a 32 bit os you can only put in 3 GB of ram. So if you find yourself needing more, then you need to jump to a 64 bit version of windows. When you get to that point you really have to consider if it's worth the headache to upgrade the pc just to use the vixen scheduler. There's other players that are more efficient and don't require tons of ram for rendering. You could export your sequences and use xlights on the same computer. Or you could export them and upload them to an FPP for playback. You could buy a dedicated FPP for less than a windows upgrade license.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Well, I was putting my install disk back in the case and realized my copy of Win7 also has a 64 bit disk, so I'll go ahead and format and install 64 bit. Also ordered a couple of 2 gig sticks so it should run a little smoother. The two 1 gig sticks are only DDR 1066 so DDR3 1600 should be a nice improvement as well. A $35 investment is cheap peace of mind!
