Im not understandin...
 
Notifications
Clear all

Im not understanding something

4 Posts
3 Users
0 Reactions
1,833 Views
Posts: 50
Topic starter
(@tombmatt)
Trusted Member
Joined: 18 years ago
[#33827]

I have 2 controllers setup 1st is dmx 512 channels starts at 1.
next is e1.31 4096 channels starts on universe 2 start channel 1 .
when I export to fpp in the in the nextwork xml file it has dmx 1- 512 and e1.31 start at 513 to 4096 losing 512 channels?

-
50
midnight2014.fseq
00:03:40.4210000
-
-
0
DmxUsbProModule
1
512

-
1
Streaming ACN (E1.31)
513
4096

Untitled

3 Replies
Posts: 50
Topic starter
(@tombmatt)
Trusted Member
Joined: 18 years ago

at start of export the screen shows different #s start 512 thru 4608 not 4096. so what does the output have??

Untitled2

Reply
Posts: 251
(@don-gillespie)
Reputable Member
Joined: 13 years ago

A universe only supports 512 channels, so you need to add more universes if you are using 4096 channels


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

"Start" has different meanings in those two contexts. In vixen, each controller starts at 1 and goes to however big it is. So if you have 8 full universes in an sACN controller it would use 4096 channels.
4096 sACN channels + 512 dmx channels = 4608 total.
Fpp uses an absolute numbering scheme. So if your dmx channels are first, they will be 1-512. And the sACN channels will be 514-4608.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Share: