Notifications
Clear all

Replace Feature

3 Posts
2 Users
0 Reactions
1,499 Views
Elmo2resc
Posts: 265
Topic starter
(@elmo2resc)
Reputable Member
Joined: 19 years ago
[#32525]

What would be a useful tool is a replace feature. I'm not sure if this is already possible, if it is I can't figure it out.

When I import from Vixen 2.1 the import tool doesn't always recognize a pulse effects. If it was possible to select a number of fixed levels and replace with a pulse effect It would save a tremendous amount of time. This could also be useful for many other effects when programing. If you were looking to change a number of effects for a different look this could save a lot of time.

Great Job Vixen Team!!


2 Replies
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Are you asking for a tool that actually inspects the data and attempts to convert a bunch of fixed levels into a pulse? If so, that's the import wizard. However there are many cases when the detection fails because the pattern you have doesn't quite match what it's looking for. In those cases you get a bunch of small fixed level effects. Are you using the newest release from yesterday? It includes some improvements in the import wizard.

One thing you can do, is simply draw a new effect on top of the old ones that you're trying to replace. you can use the alignment tools to get the start and end time lined up, and then just delete the original ones.

You can also use the selection filter tools to help with replacing effects. First use the selection filter to limit it to only one type of effect. Then drag select across a range of effects. Say you only want to select pulse effects, select "pulse" in the selection filter and then drag select a bunch of effects. Only pulse effects will get selected. Then you can right click on one of the selected effects and "edit effect" this won't let you change from one effect type to another, but it will let you change the settings on several effects at once.


Reply
Elmo2resc
Posts: 265
Topic starter
(@elmo2resc)
Reputable Member
Joined: 19 years ago

What I run into is the many fixed effects that don't import as pulse. Lets say I want a full fade I highlight every effect I want changed. They could be different lengths or all the same or maybe even a pulse that didn't come out right. I apply the fade to it from 100 to 0 and the color. It then changes all of the selected effects to a fade within the time line of each individual selected effect. I had used a lot of fades over fades over the years so that is where my problems usually occur. I know most of this is because of the conversion process and its limits. I would think it could help change the entire look of a show quickly even on sequences not imported. Some of the sequences were imported prior to 3.1 and some after. Having a selection filter tools that you could change the effect would be on the lines I was looking for I guess. Thanks for the response.


Reply
Share: