Possible patching o...
 
Notifications
Clear all

Possible patching order Issue?

8 Posts
3 Users
0 Reactions
1,274 Views
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago
[#58450]

Not sure yet if this is a bug or now, but I've been trying to do some pixel order changes for some of my icicle elements and seem to be having trouble.
I'm running a test version of 3.11U1 (fix for a problem I was having - temporary until end of season - thread is "Vixen 3 shuts down when opening 'Configure Preview'").
Anyway, I received 9 Ray Wu icicle pixel strings and all of them except one were wired upside down (like peace stakes), so I was trying to reverse the patching order of each of the drops to correct the issue. I went into the 'Setup Previews' config menu, selected my 2024 preview, clicked 'configure', selected the icicle string strings (7,7,7 X 10) one at a time, went through each 'string' (drop) and reversed the order (except for the string that was ok). The order looked good for each drop when I was done here.
Then, when went into the 'Display Setup' window, selected the same strings, selected 'Patching Order', and clicked the settings icon, the displayed patching order does not show the reversed patching I had just completed in the Preview Setup. I have not yet gone out to see if the display is working correctly but am wondering if this patching done in Preview should show up the same in Display Setup.

I'll try checking tomorrow to see if the correction has worked and post here.


7 Replies
jeffu231
Posts: 2458
(@jeffu231)
Famed Member
Joined: 15 years ago

The preview linking and the patching are not directly tied together. So just changing it in the preview will not change or configure the actual physical patching in the Display setup. The reason is you may be doing the reversing on the controller side of it so the patching depends on that. If you are not doing it at the controller, then just configure the patching order in the display setup. There are right click wizards in there to quickly do zig zag or reversing. Then when you patch, that order will be followed no matter what order the elements are arranged in.


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

Thanks Jeff, I was wondering about that... So I did see that there was a right-click item in Display Setup for reversing the pixel order but it was always grayed out. I just played around with it a little more and realized I had to actually highlight all of the individual pixels I wanted to reverse the order of and then the tool was usable. I learn something new almost every day with this software! So I went ahead and reversed all of the drop string pixels of the upside-down icicle strings and will do a test on it this morning.
This particular order of the Ray Wu icicle strings are really weirded out though... While observing them last night I realized that the one string I thought was ok (drop string pixel order was right) was actually reversed also in a different way. It looks like it was wired right to left instead of left to right like the others. So I need to try reversing the order of the drop strings without reversing the pixel order in each of the drops... keeping my fingers crossed that this works.


Reply
jeffu231
Posts: 2458
(@jeffu231)
Famed Member
Joined: 15 years ago

Overall you want to think of the icicle lights as a long short matrix. You want to model it in the software so that pixel 1 is the lower left and then go from bottom to top then over to the next string bottom to top, etc, etc. That will make the effects work correctly. That is important. Then once you have it modeled that way, the patching is designed to make the physical lights mimic the model. Then you get the effects working right on the model and the physical lights match. I have some of the snow tubes / drip tubes. I model them as a Matrix. Icicle lights can be modeled the same and some times it is easier in the long run since you can configure the matrix that way you of the box. There are also options in the Matrix setup to do zig zags that do set the patching order and make the whole thing easier if your physical layout is not to crazy. Food for thought.


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

Thanks again Jeff, All is working and looking proper now. I did set them up as a matrix as you mention. Finally the snowflakes are falling down instead of up! 😄
The one set that was wired backward from right to left is also working now as I was able to just reverse the drop-string order without affecting the pixel order within the drops. I wish I had a few more pixels down though... I tried text on it and there are not enough vertical pixels to make it look readable. Even tried smaller point text, didn't really help with readability. Oh well, text was just an after thought to see if it would work so no big deal.
I did notice one thing about the preview setup though... although I was able to fix the weird string (re-ordering just the drops) in the Display Setup, I couldn't find a way to do the same thing in the preview setup, so the preview still shows that particular string set as moving backward right-to-left while all the others are moving correctly left-to-right.


Reply
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

Did you drag that one backwards?


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

no, I guess since I had to change the patch order of the drop-strings in display setup it must have caused the preview to show the reverse direction. It's really not a big deal, but I was wondering why I can't re-order the drop strings in preview like I can in display setup.


Reply
jeffu231
Posts: 2458
(@jeffu231)
Famed Member
Joined: 15 years ago
OptykMuse wrote:
no, I guess since I had to change the patch order of the drop-strings in display setup it must have caused the preview to show the reverse direction. It's really not a big deal, but I was wondering why I can't re-order the drop strings in preview like I can in display setup.

You can reorder them. But you should not need to. The preview should resemble the ideal model no matter what the physical wiring is. Pixel one at the lower left and strings going from bottom to top and left to right. This is the default for a matrix. That will give you the ideal target for the effects to use and ensure they act as they should. You don't get upside down text or effects that are backwards. You may not always be able to tell, but there will be signs in various effects that just don't act like they should. Then once you have the ideal model, then account for all the physical anomalies in the patching.

The Text effect is a good effect to test your preview / element setup. (Assuming you have enough resolution to realistically tell even if you don't use it in a real sequence) If text is upright and not backwards, scrolls in the correct direction based on the settings, then you have the preview / elements laid out correct in respect to the element arrangement. Then use the patching to make the physical lights match.

EDIT: The single biggest mistake I see people do is try to model the odd wiring setups in the preview. I can't emphasize enough that those get resolved in patching, not the preview / element arrangement. The patching order configuration in the Display Setup is specifically intended to help make the patching correction easier to maintain when it is not in alignment with the perfect model.


Reply
Share: