Notifications
Clear all

X10 Output Plugin?

13 Posts
9 Users
0 Reactions
8,121 Views
michaelc
Posts: 1540
(@michaelc)
Noble Member
Joined: 19 years ago

I'm switching my whole house (slowly) over to insteon. I never actually used vixen to control x10. Instead I just used the x10 software to turn on my controllers 10 minutes before the show and off 10 minutes after.


Reply
Posts: 2
(@lightheaded)
New Member
Joined: 17 years ago

Dusty, thanks again for posting this all those years ago! I've gone back and forth between Vixen and LOR some many times that I lose track of what worked with what! But, this method is actually quite brilliant and not cumbersome at all...I'd even say it negates the need for an X10 plugin. Yes, I agree that using X10 for any kind of serious sequencing is a waste of time...but, I still find it useful. Especially, if you happen to have exterior lighting that is already wired with X10 wall controllers and you are running an "intermission" type sequence where you'd like the "house lights" to come back on for several minutes and then turn off as the next sequence is starting. Thanks to this post I was able to add two channels to my profile, update my "intermission" sequence, and had the effect I wanted running in my show within minutes! 😎


Reply
michaelc
Posts: 1540
(@michaelc)
Noble Member
Joined: 19 years ago

never mind


Reply
Page 3 / 3
Share: