Vixen 3 Output Modu...
 
Notifications
Clear all

Vixen 3 Output Module Programming Tutorial

13 Posts
7 Users
0 Reactions
10.2 K Views
Posts: 2216
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago

@JHinkle
I took a look at making your Module Data static. In order to do this you will need to make 2 changes(from what was in the tutorials).
1. Define it as ModuleStaticDataClass in the Descriptor:
public override Type ModuleStaticDataClass
{
get
{
return typeof(MyDataObject);
}
}

2. In the Module Instance, for the memberwise clone you need to override StaticModuleData instead of ModuleData:

public override IModuleDataModel StaticModuleData
{
get
{
return _myData;
}
set
{
_myData = value as MyDataObject;
}
}


Reply
Posts: 2216
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago
bobkeyes wrote:Chris,
Thanks for the great tutorial. I'm just starting with it. However, when I open the Vixen testbed I do not have the Administration tab like you show. All I can bring up is the DisplayPreview. What am I doing wrong?? I've reloaded 3.0 to no avail.

I just realized where the confusion might be. Usin Vixen 3.0 beta you set up the controllers using the Vixen application.


Reply
Posts: 4
(@merlinjim)
Active Member
Joined: 13 years ago

I followed this! It worked out pretty good - I made some comments on the YouTube videos parts 12 and 14 with the changes needed for Vixen 3.0.10

And here's my first Controller Module (aka Output Module):

http://doityourselfchristmas.com/forums/showthread.php?29917-Vixen-3-data-export-module


Reply
Page 3 / 3
Share: