Fading non-solid ro...
 
Notifications
Clear all

Fading non-solid rows

9 Posts
6 Users
0 Reactions
2,982 Views
Posts: 290
Topic starter
(@jeeves55)
Reputable Member
Joined: 19 years ago
[#17564]

I have a sequence where I have my megatree spinning the color green. And while it is spinning, I want it to fade from 100% to 0. I know that if this was a solid on the Ramp Off would be the tool. But it's not solid, there's spaces. How do I get a smooth fade without having to manually change the intensity of each individual cell?


8 Replies
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

I do this a ton. Especially with my Spiral spinning. I like it to continue spinning and fade out while spinning.

I use the "Substraction Paste" which is under More Paste

I find an unused area of the sequence and do a Ramp On over the same size area I want to fade on the megatree. Usually 16 rows for 2 seconds. I then copy that to the clipboard and then do the Substract Paste where I want the Fade Out.

Probably not the best job of desribing it, but hey it's 2:30 in the morning and I've been writin code since Noon.


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

Find an unused channel, and create a "RAMP OFF" for the entire duration that matches the fade that you are after.
Highlight the area and copy it to the clipboard (CTRL-C). Put your cursor on the first channel of the mega-tree, at the point where you want your ramp off to occur. Right Click, , , . It will scale the underlying channel, based on the values in your paste buffer.

Move your cursor down one row, Right Click, , ,. Repeat for as many channels as you have in your tree.

One alternative method, if you have the spare space, is to create a multi-channel RAMP OFF that matches the number of channels in your tree. Then you only have to cut/paste once, rather than on every channel.

Don't forget to erase the temporary RAMP that you created.

Hope this helps.


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago
LabRat wrote:Find an unused channel, and create a "RAMP OFF" for the entire duration that matches the fade that you are after.
Highlight the area and copy it to the clipboard (CTRL-C). Put your cursor on the first channel of the mega-tree, at the point where you want your ramp off to occur. Right Click, , , . It will scale the underlying channel, based on the values in your paste buffer.

Move your cursor down one row, Right Click, , ,. Repeat for as many channels as you have in your tree.

One alternative method, if you have the spare space, is to create a multi-channel RAMP OFF that matches the number of channels in your tree. Then you only have to cut/paste once, rather than on every channel.

Don't forget to erase the temporary RAMP that you created.

Hope this helps.

Didn't know about "Scale paste." I'll have to look and see if the results are different than the Subtraction paste. in any case, LR's explanation was probably a more clear.


Reply
Posts: 290
Topic starter
(@jeeves55)
Reputable Member
Joined: 19 years ago

They both make sense, and they both are MUCH easier than doing each cell manually! Thanks!
I knew KC thought of everything!


Reply
Page 1 / 2
Share: