Well, I've been at it again! Thanks to K.C.'s help(and patience) I've been able to work on a programming tutorial for creating Vixen 3.0 Output Modules. The tutorial is now finish! Feel free to ask any questions or let me know if there's anything I can do to explain anything better. I'll answer any question I can.
Part 1 - Introduction
Changes from the intro of Vixen 3.0 beta
Part 2 - Setting up the Workspace
Part 3 – Starting the Descriptor
Part 3a - update on the GUID
Part 4 – Creating the Instance Class
Part 5 – Creating the Module Data Class
Part 6 – Finishing the Module Data Class
Part 7 - Starting Setup
Part 8 - Continuing Setup
Part 9 - Finishing Setup
Part 10 - Setting up the serial port
Part 11 - Setting up your Data Output
Part 12 - Introduction to Commands
Part 13 - Beginning _UpdateStates
Part 14 - Finishing up
As with my previous tutorials, these are written by a non-programmer(me) for anyone, including other non-programmers.
I hope this helps!
Chris
Thanks Again Chris
Terrific tuts.
Mods, any chance of making this one sticky?
Great job again =)
Thank you for doing this for Vixen 3.0; I watched your videos for the earlier Vixen version and was hoping something like this would arrive shortly. My Christmas wish arrived early. 🙂
I elected to serialize the DataObject as a Static since I will be using multiple controllers of the same type and will be on the same 485 bus.
When used as static, the object is never created and any reference to it generates a null fault.
I changed it to local as shown in your video and all work fine.
Is this a bug I should report or am I missing something.
Thanks
