I am having trouble figuring out which kinda of controller I want to use. I have it narrowed down to Ren24, Lynx Express, and the Firegod. I don't even know where to start with these, I dont even know where to get the Lynx Express or the Firegod. All I know is I want something relatively simple to use and something dimmable, and something that is not too expensive.
So if anyone can help me out with this, I would really appreciate it.
Thanks,
Jess
P.S, I'm a newbie at this stuff, so take it easy on me:D
i'll admit bias up front and steer you to fkostyun's ren24. i just ran a group buy for parts kits to populate the board, and had a few commit to buy, but never heard from them again, so i have a few kits to spare.
in addition to this parts kit, you'll need the board from fkostyun.
a ren24 in a cg1500 is an unbeatable blinky-flashy solution.
jem5136 wrote:I am having trouble figuring out which kinda of controller I want to use. I have it narrowed down to Ren24, Lynx Express, and the Firegod. I don't even know where to start with these, I dont even know where to get the Lynx Express or the Firegod. All I know is I want something relatively simple to use and something dimmable, and something that is not too expensive.So if anyone can help me out with this, I would really appreciate it.
Thanks,
JessP.S, I'm a newbie at this stuff, so take it easy on me:D
Best recommendation is to read the Wiki's at both DIYC and DLA then read as many forum posts as you can handle.
Each of the controllers you listed has strengths and weaknesses that you will need to consider.
Each of the forums will have their converts that will say what they have is the best.
The Lynx range offers DMX, consistant quality, good support (DLA) and i would say great manuals.
The Renard Range offers simple serial setup, good support (here), range of options, optional DMX support. The diverse range is both a big positive and a smaller negative as it makes choice harder.
Firegod i cannot comment on as i have not followed it very closely.
Things to consider
Number of channels
AC or DC
Voltage to be used
controllers centralised or spread around yard.
Using External SSR or onboard SSR.
Refresh or interval rate to be used 100/50/25ms
There are many others including dollars, do some gazing into the future and think what you might want later, this can affect choice.
My own choice was to go DMX protocol due to channel count/interval timings i wanted to use then and in the future, the controllers i use are my own so i have no bias to any of the controllers you have listed
Cheers
Aussiephil
