jpb wrote:I am confused. If a solution has not been found I have a solution.When I created my show it was nearly 29 minutes long. I then went and created an extra sequence that made the program 29 minutes and 59 seconds long.
I then went and set the schedule to run on the hour and the half hour. This way, if the computer rebooted, within half an hour the time would pass a trigger point and start again.Jon
I had thought about setting mine up to run a new program every 15 minutes, given that my show is close to that time already. That still leaves the show dark for up to 15 minutes if the computer is rebooted (not ideal, but better than 30 minutes). This option requires a lot of work to setup, and even more work if I change my show order or something. This way is better than nothing, however.
bmcgeeny wrote:If for any reason Vixen shuts down a program while the timer is running it does not automatically restart the timer. The only thing your can do is go up to the menu, select programs and restart current timers. If something is set to run it will restart the program from the begining and shut it down at the end of the program after the timer runs out.As far as I know there is no way to have vixen restart a timer by itself after it has shut off
The far deeper problem is why do you have a computer that reboots itself? Sounds like that would be the problem I would want to fix. My show computer has been on since Thanksgiving and I beleive I have only had to reboot once to correct a com port error that I caused myself.
The computer I'm using has been pretty reliable as my file server for the last couple of years. That's one of the reasons I decided to use it to run Vixen. Since it's always on anyway, it wasn't going to take any electricity away from my show. 😉
I haven't had the time to look into why it's rebooting. That is the larger problem here, but there's no reason for Vixen not to run if it does reboot during the show. I'm running Vixen v2.1.4.0 (rather than 2.5 which is in beta).
I'm not sure why the programmer wrote the timer feature the way he did, but maybe it can be changed in the next release. Something like "restart current timer automatically if Vixen is loaded during show hours."
Larry Hazeltine wrote:
I'm not sure why the programmer wrote the timer feature the way he did, but maybe it can be changed in the next release. Something like "restart current timer automatically if Vixen is loaded during show hours."
If you want to suggest it as a future feature/fix then go to:
http://bugzilla.vixenlights.com/
But consider this: If the computer reboots half-way thru a 15 minute program and there is a another one scheduled to start when it should be done, then when it reboots and starts the old program you will get a "port access denied" error when the next program trys to start at its scheduled time.
An automatic reboot and start running a previously scheduled program might be OK for some users but will have a negative impact on users who use multiple programs or scheduled events during their show.
So if you make a change request like this then you should suggest an idea that accounts for all possible scenarios and users and not just a fix for your particular difficulty (which you seem to agree wouldn't be a problem if your computer was acting normally).
There was a discussion in another thread about the scheduler and how it handled the start time and repeat until options. There was an open bug concerning the way Vixen allows the scheduled item to overrun the repeat until time. Apparently, a previous version of Vixen would end the items, but users requested the scheduler allow the overrun. I tacked onto that bug the fact that LOR ends the item and mentioned that some users would prefer the forced ending rather than schedule items with buffers between them. So this is on KC's radar. We know the issue and can work around it, I don't think we should be expecting a new release this close to Christmas to address this. This is a next year item in my opinion....
I will look for a bug on the timer restart issue if Vixen exits. And add a request for that also. These two things together, I think, would get Larry his expected "LOR-like" behavior.
I have a kinda related question. I have a schedule set for 6-10 pm, and it stops just fine, but then in the middle of the night, I wake up and random channels are on. my intention is to power the boards from a switched outlet and turn them off at night, but it would be nice to know what is causing this and fix it in Vixin?
Maybe an ALL OFF sequence that runs as a background sequence? Or maybe something like that?
Any ideas?
andyhough wrote:I have a kinda related question. I have a schedule set for 6-10 pm, and it stops just fine, but then in the middle of the night, I wake up and random channels are on. my intention is to power the boards from a switched outlet and turn them off at night, but it would be nice to know what is causing this and fix it in Vixin?Maybe an ALL OFF sequence that runs as a background sequence? Or maybe something like that?
Any ideas?
For Olsen and Grinch boards that are left powered for extended periods without any input, you can expect that eventually the lights will come back on. The best way to handle it is to keep sending an all OFF sequence to them during their idle times or just kill power to the boards.
RavingLunatic wrote:If you want to suggest it as a future feature/fix then go to:
Ack, another site to register for. 🙁
But consider this: If the computer reboots half-way thru a 15 minute program and there is a another one scheduled to start when it should be done, then when it reboots and starts the old program you will get a "port access denied" error when the next program trys to start at its scheduled time.
By "restarting" I don't mean that it should run the entire originally scheduled time. I mean that it should start from the current time and run until the scheduled end time. For example, if it restarted halfway through an hour show it would play for 30 minutes. That way if a different show was scheduled right afterwards, it would still start on-time.
It seems like it would be tedious to schedule a new show to start every 15 minutes from 5-9:30 which is why mine is set to repeat the same 5 sequences during that time period. I only have to set it up once instead of 18 times.
Larry, I posted a feature request for the automatic running of the "Restart current timers at Vixen startup" in bugzilla for me (us). If you want to add more info, you can also register...
Hummm, you mean detect where I should be in the show if I had actually started on time and start there? Possibly even in the middle of sequence? LOR does that? Let me think about that. I can add to the feature request. I don't know how hard that would be, but KC will prioritize it and let us know....
Larry Hazeltine wrote:
It seems like it would be tedious to schedule a new show to start every 15 minutes from 5-9:30 which is why mine is set to repeat the same 5 sequences during that time period. I only have to set it up once instead of 18 times.
Some folks do program this way so that they know when the next show performance will start exactly and also have an intermission (with background sequence) so that traffic will move on.
Maybe a better option would be to suggest an option in the scheduling about what to do if a restart occurs (either by accident or someone forgot to start their computer in time) after the first timer.
Restart Options could be something like:
- Start last missed timer
- Ignore past timers and wait for next timer
Rokkett - are you taking notes? 😉
rokkett wrote:Larry, I posted a feature request for the automatic running of the "Restart current timers at Vixen startup" in bugzilla for me (us). If you want to add more info, you can also register...Hummm, you mean detect where I should be in the show if I had actually started on time and start there? Possibly even in the middle of sequence? LOR does that? Let me think about that. I can add to the feature request. I don't know how hard that would be, but KC will prioritize it and let us know....
No, if the computer starts during show hours, it will start the show from the beginning but only play until the normally scheduled stop time.
