I want to build a mega tree but money and channels happen to be a little short for my first display so i was thinkning of doing 2 mini mega trees. I'm thinking 2 trees about 5 foot tall (so they will be above the snow) 2 colors and 16 channels each, they will probably only be 1 color and 8 channels this year but i will get two ren2216's for next year which will leave 24 for the house and whatever else.
has anybody done or seen this done before? i am thinking this will give me a mega tree with out having the expense of supplies for one, also when i do build a mega tree i can use these as a stepped effect with the mega tree.
I am using 24 channels on my mini-mega tree. My strands are installed as inverted "V"s. I wanted fine control of white, so 12 separate channels, but needed multiple colors as well. My compromise was half my Ren24 channels to the whites and 2 channels for each color so I can still fade the color transitions in side to side.
Wayne J wrote:Yep, I do exactly that (the green and blue trees on the left in the picture). Mine are a single color though, with 8 channels each. What do you want to know?
was mainly just curious how many people have done it. what did you use for your tree frame? did you just do them like a regular mega tree or more like the mini trees? I plan on going and getting the supplies tomorrow after the football game is over.
Mine are very similar to my mega tree. I used electrical conduit for a base ring, held up with Tee's and iron bar, a center mast which is held up with a piece of tubing welded to a iron bar. On top to hold the lights I use a coupler that has slots cut into it. I put 8 strings of 100ct lights on it, which gets four loops. The trees are 6' tall.
I am actually putting the frames for them up tomorrow (no lights). I can take pictures and give more info then if you like.
Wayne J wrote:Mine are very similar to my mega tree. I used electrical conduit for a base ring, held up with Tee's and iron bar, a center mast which is held up with a piece of tubing welded to a iron bar. On top to hold the lights I use a coupler that has slots cut into it. I put 8 strings of 100ct lights on it, which gets four loops. The trees are 6' tall.I am actually putting the frames for them up tomorrow (no lights). I can take pictures and give more info then if you like.
that would be great
I am doing 10 mini trees this year that seem be more like mini-mega trees. The design sounds like Wayne's with a central shaft of 1 1/4 inch PVC and 1/2 inch sprinkler line to make the base hoops. They will be 3 feet wide and a little over 4 feet tall. My yard is on a hill so the idea is that I can tilt the "skirt" so that the tree is flush to the ground all the way around. To get that I made the top a little different with PVC cut in half like a trough that the light strings can slide through. Each tree will have 3x100 strings of white, red, green and blue and will be topped with a strobe. I'll post pictures....
Here are some pictures of mine. I start out with two pieces of ½ electrical pvc conduit for the base ring. Mine are cut at 6½ ft and gives a 4ft diameter. The stakes are 5/8" rod, and the T's are made with ¾" CPVC (drinking water tubing). I cut a 1/3 of the T out This slides right over the rod and is secured with pins made from a coat hanger. The center mast holder is a piece of tubing welded to another piece of 5/8" rod. The center mast is 1½" PVC. On top, I use a coupler with slots cut into it for the lights to loop in.
wayne thats kinda what my idea looks like in my head. didn't get to pick up the parts today cause my roof started leaking on my house and i had to take care of that, also while sequencing my computer crashed and i lost a ton of time fixing that so hopefully tomorrow after work i can get back on track
Started the first tree today, total cost per tree with lights came to a little under $50. not sure if its the best design but we will see how it works this year.
I used 1/2 pvc to make the base and 3/4 pvc for the upright. its a little on the flexible side but i plan to stake the main ring down and that should make it sturdy enough. will try getting some pics up when the first one is done





