WELCOME!!!!!!!
 
Notifications
Clear all

[Sticky] WELCOME!!!!!!!

1,115 Posts
455 Users
3 Reactions
1.2 M Views
Macrosill
(@macrosill)
Posts: 9740
Member
Topic starter
 

Finn,
Welcome and we are glad to have you aboard. I think it is great that you will be the 1st to do a computerized display in Denmark.

The Grinch controller layout is not available for home etching, as far as I know. Shipping from the USA to Denmark is not too bad. For a 1 pound box First Class Mail would cost less than 9 dollars. It does not list a delivery time but I would guess 1-2 weeks would be reasonable. Post in the Grinch forum and maybe the pcb layout will be made available.

http://www.doityourselfchristmas.com/forum/viewtopic.php?t=1047


Thanks,
Brian, your friendly site Admin.

 
Posted : 04/11/2007 7:49 am
(@bromsat1)
Posts: 3
New Member
 

Hi
Thank's alot for the varm welcome, i used the link you supplied, and dowloaded it, so let's se if I manage to make the PCB in time.
If not, I have gained access to 8 SolidState relays, so I can make a simple parrallel boks this year.
I tried with 8 channels in Wixwn, with a test picture of my drive in, and it looked more or less okay.

I'll post some quick movie or Jpeg so you can se what I been fixing this year., do to I'm a little late.

Brgds
Finn


 
Posted : 05/11/2007 1:29 pm
 Ace
(@ace)
Posts: 2
New Member
 

Hello
My name is Jeremy, I am brand new to the hobby. I have been poking around here for the past couple of days, and have found a wealth of information. Thanks to all who have contributed.


 
Posted : 05/11/2007 3:34 pm
(@datmafia)
Posts: 5
Active Member
 

yup, another Newbie

Hi,
My Name is Kev and I've long been interested in learning how to control Christmas lights. I've read up on what is needed quickly to compare the DIY methods vs. light-o-rama solutions. The only concern I have is my lack of electrical expertise-I don't want to make something that is going to be a fire hazard. I am under the impression that I need to make SSR's and make a box (like parallel port) to connect the SSR to the PC and use Vixen to program it. I have also read some of the tutorials on here and hate to say I'm still lost. Any info for a newbie would be appreciated as I don't see the need to spend 500.00 to make a programmable Christmas light show. I want the ability to make simple to complex light shows to Ambient and Techno music without spending a fortune or melting/burning down the house. Whew-Thanks for letting me on board.
DATmafia


 
Posted : 06/11/2007 6:52 am
NogginBoink
(@nogginboink)
Posts: 482
Honorable Member
 

Kev,

Your reading is right... you need two pieces of hardware:

One device to translate signals from the computer into signals for your SSRs. This would be an Olson 595, a Renard, a Grinch, etc.

The second is a set of SSR's. Most of the SSR boards folks are using here control 4 channels from a single RJ45 cable. So, on your controller board you're likely to have one RJ45 jack for every 4 channels. You'll need an SSR board for every 4 channels as well, and a cable from the controller to each SSR.

So, first decide which controller you want to use. I think an Olson 595 would be a good beginner project... it's a simple circuit, it's easy for a beginner to understand, and it's got good suport on the forms.


There sure as hell *are* user-serviceable parts inside!

 
Posted : 06/11/2007 9:39 am
(@adam-i)
Posts: 2
New Member
 

Hello All,

I'm Adam and I've been running regular Christmas lights for years. I’m looking forward to animating my light display.

There is a wealth of information here.

Thx Adam


 
Posted : 12/11/2007 2:14 pm
Macrosill
(@macrosill)
Posts: 9740
Member
Topic starter
 

Welcome aboard Adam, glad to have you here.


Thanks,
Brian, your friendly site Admin.

 
Posted : 12/11/2007 5:23 pm
 ben
(@ben)
Posts: 1084
Noble Member
 

Hello all! My name is Ben and I am 13. I am lucky enough that my dad had a box full of lights to help jumpstart my Xmas!! I spent the last 2 years at after Xmas sales because i knew my year of alot of lights was coming. Well, this year is it! Xmas 2007 will start with 1500-2k lights and around 16-20 channels. It will get bigger!!!!!!

I live in mechanicsville, VA so if anyone is near me and does this could you stop by and help me!! Send me an E-mail or PM so we can work something out!

Ben


128 lynx Freestyle DMX channels(not all used), 4 SSR4 DMX channels, 120 Ren24 channels, and 48 Ren16 channels!!

 
Posted : 17/11/2007 9:29 am
(@robots4joey)
Posts: 221
Reputable Member
 

Welcome Ben!

It's cool to see someone else obsessed with rockets as well as Christmas displays!

-Joey


192 channels this year-all dimmable!
2008's Video in Hi-Def:
http://www.vimeo.com/2695308
Web Site: www.joeymarshall.site40.net/home.html

 
Posted : 17/11/2007 6:34 pm
 ben
(@ben)
Posts: 1084
Noble Member
 
robots4joey wrote:Welcome Ben!

It's cool to see someone else obsessed with rockets as well as Christmas displays!

-Joey

what cert level are you? I am JRL1 but I buddy fly J - O motors.

Ben


128 lynx Freestyle DMX channels(not all used), 4 SSR4 DMX channels, 120 Ren24 channels, and 48 Ren16 channels!!

 
Posted : 17/11/2007 7:12 pm
(@tommy)
Posts: 195
Estimable Member
 

Hi Everyone...

My name is Tom and I live in a very small town in Nebraska. I've wanted to learn about how to control Christmas lights using a computer for about 10 years now. And now that I've found this place, I think I'll have all of the support that I'll need to get it done.

Ever since I was a kid, I've always been fascinated by Christmas lights. And when I was only 7 years old, I bought my first string of seven C9 outdoor lights. And since then, I've been adding to my displays. My first controller was mechanical.... using a motor from the bbq grill that drove a small 'finger' to depress several micro switches to turn on in sequence spelling out the word "NOEL". Fortunately, the technology has changed and the C9s and C7s are retired as well as the mechanical sequencer, and now mini lights are the mainstay.

A few years ago, I stumbled across Planet Christmas and found out a lot on that site. That led me to the Computer Christmas site with even more great information. And finally a few weeks ago, I found DIYC and the Christmas Wiki. So now I have just about all the info I can use to start making some displays.

I just finished downloading Vixen and the user manuals & schematics for the Ledtriks panels. I'm totally impressed with the willingness of everyone to help out the newbies like myself. This is going to be one great hobby.

Tom


 
Posted : 18/11/2007 10:43 pm
 xmus
(@xmus)
Posts: 861
Noble Member
 
tommy wrote:

I just finished downloading Vixen and the user manuals & schematics for the Ledtriks panels. I'm totally impressed with the willingness of everyone to help out the newbies like myself. This is going to be one great hobby.

Tom

Tom welcome, I can tell you one of my favorite parts of this community is the collaboration. If you need a little mental stimulation, you've found the place!


 
Posted : 19/11/2007 12:58 am
(@tommy)
Posts: 195
Estimable Member
 

Xmus....

Thanks for the warm welcome. I've already had the pleasure of communicating with Brian several times this weekend. And within minutes of my first post, wjohn sent me a message offering his help. It's that kind of attention that you all have shown that will help ensure my success.

Now my biggest hurdle is going to be getting stuff planned before I start ordering boards and parts. I may have to forego sequencing to music this year and just go with the sequencing. I don't think there will be enough time to get everything done for this Christmas season. But then, that will give me something to do the rest of the year.

Tom


 
Posted : 19/11/2007 3:49 am
(@dodgesport)
Posts: 4
Active Member
 

Name is Ken and I am a newbee to this. I have a strong electronic background and fiddle with small stuff. This will be my big adventrue into automation. I have always wanted to play with it. I have a three channel music light controller. But that gets pretty boring pretty fast. I subscribe to Nuts and Volts and the VIXEN article got my electrons flowing and I want to get into this. I was planning on building a ICICLE board, but came across the posts describing the Grinch. It sounds like it will fit both my budget and beginning skills. So off I go.
This looks like a great site, lots of very positive posts and helps.

Thanks to Brian for getting me logged on, maybey my Spam filter stopped the autolink from getting sent.

Hapoy iighting and Merry Christmas!


 
Posted : 19/11/2007 10:01 pm
piesrule58
(@piesrule58)
Posts: 443
Honorable Member
 

Howdy all,

My name is Terry and I live in Newcastle, NSW, Australia. My wife and I love Xmas and we have been steadily building our static display over the last 6-7 years. We now have around 20,000 mini lights plus rope lights etc.

The next step is to computerise the display to music. Hopefully this is where you guys will come in, because I am a complete novice when it comes to electronics. Any advice on what I need to get started on an Aussie display (240v) would be greatly appreciated.

I realise that it is going to take time to set up so I am planning on my first computerised display for Xmas 2008.

By the look of this forum I think I am in the right place.


TC. I could be anything, if I had the talent. :mrgreen:

 
Posted : 20/11/2007 2:45 am
Page 3 / 75
Share: