Waterproofing Contr...
 
Notifications
Clear all

Waterproofing Controllers

8 Posts
6 Users
0 Reactions
2,927 Views
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

You might consider making water your friend. Do a good job of preventing water from getting inside the controller box from the outside by mounting it above the ground and covering surfaces where water might seep through. Make sure you have at least one drain hole so water that happens to get in can leak out and mount the controller vertically so the PCBs are vertical and any condensation that may form can drip off. Then make sure any outside connections are treated the same way so they are never laying in a pool of water.

Let's face it, Mother Nature is not a good enemy to have. She almost always wins out in the end.


Reply
Posts: 204
(@m1anh)
Estimable Member
Joined: 12 years ago

Its very true. We have a hobby that takes the very two things that don't mix and for the most part give them to a bunch of amateurs and the Chinese. Expecting all to be good...
No insults intended..

Sent from my HTC One S using Tapatalk


Reply
Posts: 91
(@bigpav)
Estimable Member
Joined: 17 years ago

Pure H2O does not conduct electricity, it is the salts in the water that transmit electricity.


Reply
Page 2 / 2
Share: