Waterproofing Contr...
 
Notifications
Clear all

Waterproofing Controllers

8 Posts
6 Users
0 Reactions
2,929 Views
Posts: 499
Topic starter
(@frederic)
Honorable Member
Joined: 14 years ago
[#40308]

Water ain't my friend:

http://doityourselfchristmas.com/forums/showthread.php?30169-Vaporized-Terminals-%28w-pics!%29

And later on, I tried "Neverwet" which is officially not for electronics but it seems to work:

http://doityourselfchristmas.com/forums/showthread.php?36305-Waterproofing-Experiment

This year, I used a much more expensive electronics waterproofing product called "H2OFF", which has limited distribution and not available in the US, at least not that I've found yet. I have a friend in New Zealand who "borrowed" one from work and sent to me for the cost of shipping.

The test victim was a digital alarm clock that plugs into the mains, and was not 100% functional. The switch that enables the alarm is broken. I took out the guts and separated the switch board from the main board, and sprayed the board with the H2OFF thoroughly, then let it dry. Afterwards, I plugged it in and it lit up and blinked 12:00. Then, I did something potentially dangerous - by holding the insulation of the power cord, I placed the running main board into tupperware that was 1/2 full of ordinary tap water. The clock kept flashing, and eventually flashed 12:01, then 12:02, etc. I pulled it out when the display flashed 12:40.

The next test is board repair. Can I solder through with this goop on? Well, it takes a while for it to boil off but it does though I did get a bit of crud on my soldering iron tip I had to wipe off after every touch to a solder pad. The clock didn't have that many discrete parts but I unsoldered them one at a time, then soldered them back in, then re-sprayed with the H2OFF, then back in the water tank it went and I applied power. I unplugged it when the display flashed 12:10.

I haven't found a place in the US that sells this stuff and my friend in NZ say's its expensive.

I wanted to share the results, because we often see posters talking about water problems their displays experience (I am typically one of them) and thought maybe this would help.


7 Replies
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago

Interesting. When you do testing though, don't use ordinary tap water. Water doesn't conduct anything by itself.

I tested some lights last year that survived a day in a bucket of tapwater only to have it succumb to rain outside within a week.

To have a true test, you should use a dirty saltwater solution. Or better, a saltwater spray in a high-humidity environment. Small room, humidifier, space heater, and squirt bottle comes to mind.


Reply
Posts: 204
(@m1anh)
Estimable Member
Joined: 12 years ago

This is not true.Tap water is conductive, unless your tap is connented to a good Reverse Osmosis DI feed!. Tap water usually has plenty of ions in it due to the addind of salts like chlorine. Rainwater is usually not so conductive as Tap water, but a dirty collection bucket will be full of impurities and evaporated salts.

Sent from my HTC One S using Tapatalk


Reply
Posts: 911
(@madsci1016)
Noble Member
Joined: 12 years ago
m1anh wrote:This is not true.Tap water is conductive, unless your tap is connented to a good Reverse Osmosis DI feed!. Tap water usually has plenty of ions in it due to the addind of salts like chlorine. Rainwater is usually not so conductive as Tap water, but the collection bucket will be full of impurities and evaporated salts.

Sent from my HTC One S using Tapatalk

Here in the States there is a wide range of tap water quality. Some seaside cities have RODI plants to use seawater for tap, some use wells, some add fluoride and other chemicals, some do not. There's no telling what the water quality is like in any particular city.


Reply
Posts: 204
(@m1anh)
Estimable Member
Joined: 12 years ago

It's very different in the UK. We have very hard water in some places, like where I live, Up north it's much softer, but it's all clorinenated.
I can not imagine any water company in the USA suppling RODI to the home without the replishment of essencial minerals. DI is quite corrosive and not good to drink for any length of time.

Sent from my HTC One S using Tapatalk


Reply
Page 1 / 2
Share: