Hello all,
I'm just getting started in this field and am a complete rookie. I'm going to attempt to build a Renard SS16 and have most of the parts, although I've accepted the fact that I probably won't have it ready for this year.
I ordered the SS16 board and the parts using the BOM listed in the wiki, but there are at least two pieces of information that I know I'm missing, and if it's in the wiki I wasn't able to locate it -
a) Are there any recommendations as to enclosures to put the completed board into? I have seen some pictures of boards mounted in plastic cases but not information about the recommended size or model of those cases
b) Once I have the board assembled, is there firmware on the board that has to be programmed? Is there a post with information regarding the hardware I'd need to program it?
Thanks all for any info; I'm sure I'll have more questions as I go along.
Mike:
First, welcome to DIYC. Lovely group of people, some of them even a little interested in making Christmas lights flash and blink.
mikekowdley wrote:a) Are there any recommendations as to enclosures to put the completed board into? I have seen some pictures of boards mounted in plastic cases but not information about the recommended size or model of those cases
See
This is an SS16 in a CG-1000 enclosure. That's the good news. The bad news is those have become harder to find. First, search out the threads here about YourBroadbandStore.com ... then, maybe give them a call (1-877-587-6554). They might sell you one.
b) Once I have the board assembled, is there firmware on the board that has to be programmed? Is there a post with information regarding the hardware I'd need to program it?
Yes. See
http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_Firmware
and
http://www.doityourselfchristmas.com/wiki/index.php?title=Beginners_Guide_To_Programming_A_PIC
It's all in the wiki ... 😉 ...
\dmc
Great, thanks for the points in the right direction.
I found the CG-1000 via google at http://cable-amplifiers.com/enclosures.htm , I'll have to do a little more research and then see if I can order the part.
I read the documents you linked on the PIC programmer and will start trolling Ebay for one. I'm starting to get antsy to get started (still have some of the board components on backorder at Mouser and my new soldering station gets here next week) but I'm sure I'll have more questions once things start rolling.
Thanks for the quick responses!
I searched the wiki for a page about tools but didn't find anything. Is there a page on the wiki that talks about the tools for building the board. Specifically -
a) There are a few threads on the forums about the solder gun (I purchased the one recommended in a post) but nothing on the wiki that I have found. Maybe once I'm not a rookie I can write something up
b) There are probably some hand tools I should have, like a tool to insert and remove the chips from the TIN. I purchased some tweezers and a wrist strap and a few things like that, but if there's a thread or wiki page about the other stuff I'll need on my workbench, I haven't found it yet.
Hope everyone is having a good holiday and their shows are running smoothly 🙂
Welcome to DIYC Mike, You will love it here.
mikekowdley wrote:I read the documents you linked on the PIC programmer and will start trolling Ebay for one. I'm starting to get antsy to get started (still have some of the board components on backorder at Mouser and my new soldering station gets here next week) but I'm sure I'll have more questions once things start rolling.
J1sys, a fellow DIYC member now, sells the PICKit 2 and 3, most of the members here use the PICKit 2.
I searched the wiki for a page about tools but didn't find anything. Is there a page on the wiki that talks about the tools for building the board. Specifically -
a) There are a few threads on the forums about the solder gun (I purchased the one recommended in a post) but nothing on the wiki that I have found. Maybe once I'm not a rookie I can write something up
b) There are probably some hand tools I should have, like a tool to insert and remove the chips from the TIN. I purchased some tweezers and a wrist strap and a few things like that, but if there's a thread or wiki page about the other stuff I'll need on my workbench, I haven't found it yet.Hope everyone is having a good holiday and their shows are running smoothly 🙂
Yes, there is a page on the wiki dedicated to tools, it is labelled simple enough, see: DIYC Tools
a) I hope you meant a soldering station and not a soldering gun because as the wiki says:
The Wiki wrote:Soldering Guns are made for large mechanical connections. Soldering Irons and stations are made for delicate electronics.
Fantastic, thank you!
I searched for both "tool" and "tools" on the wiki but neither revealed this page.
I used the word gun because it would be awesome to have a gun that shot out bolts of molten solder, but actually what I bought is the one recommended here: http://www.doityourselfchristmas.com/forums/showpost.php?p=3050&postcount=1 (CSI Deluxe Station w/Analog Display (CSI-STATION1A))
