Well, I happened past a house not too far from my home with the computerized lights - did a little research the next morning, and I'm hooked! This looks like a lot of fun - and I'm familiar with computers, electronics, and AC house wiring, so that part doesn't worry me.
So here is my tentative plan for 2011 to get started:
1) A Mega-Tree, somewhere between 18-22 foot tall (my thought is to size it so a 100 light string ~23' will work), 12 or 16 slices of 4 colors each (white, red, green,blue) with some sort of star on top and maybe some mini-strobes scattered in. I like the idea of the 'JUMP' pole to make it easier to erect. Will need either 48 or 64 channels, plus something to control the star and mini-strobes.
2) Eight mini-trees made out of tomatoe cages, each with white, red, green, blue. Will need 32 channels of control.
3) It seems like the Renard 24 board looks like a good way to go. I like the idea of using some sort of tele-com case and chop up some 15' zip-cord extension cords to get the power to the lights - ~12' of cord for each channel outlet. Planning on using Vixen software to run the whole works on an old spare computer running WinXP.
4) Four Renard 24's should do the trick if I stayed with a 12 slice mega-tree, but I'll need to build a fifth so I have some extra channels if I go with the 16 slice tree.
5) Should be somewhere in the vicinity of 6400 mini-bulbs, so AC power should not have to be anything too exotic. Maybe run a seperate temporary circuit out to the yard with some 12 ga direct bury romex or something and a GFI.
6) My thought is to do my homework and visit as many locations as I can the next few weeks - and then start off by buying the lights during the post-holiday sales. Attend the "Light Up Ohio" meeting in May down in Columbus, try to get into a coop to buy Renard parts, and then start building the electronics and the other hardware over the summer.
So - a couple of questions -
A) Am I missing anything really obvious in my plan ?
B) It sounds like a dumb question - but is there any difference between brands of mini-lights? I am assuming they are all the same, but I have no idea.
C) What is a 'good' price on 100 light strings? I see several places having the GE String-a-Long 100-Count ConstantON Mini Lights on sale for $4.79 - can I expect it to be significantly cheaper, or should I just grab them now while everybody still has scads of them on the shelf?
We've hooked another one!
mschreuder wrote:Well, I happened past a house not too far from my home with the computerized lights - did a little research the next morning, and I'm hooked! This looks like a lot of fun - and I'm familiar with computers, electronics, and AC house wiring, so that part doesn't worry me.
Welcome to DIYC mschreuder!
Do you know if the house you saw was ran by a DIYC member or someone else?
So - a couple of questions -A) Am I missing anything really obvious in my plan ?
B) It sounds like a dumb question - but is there any difference between brands of mini-lights? I am assuming they are all the same, but I have no idea.
C) What is a 'good' price on 100 light strings? I see several places having the GE String-a-Long 100-Count ConstantON Mini Lights on sale for $4.79 - can I expect it to be significantly cheaper, or should I just grab them now while everybody still has scads of them on the shelf?
A) Well that depends, you said that you are familiar with electronics, does that include building them? You may want to check over the list of DIYC tools. A soldering station is very useful and if you plan on programming the PICs yourself you will need a PIC programmer like the one J1sys sells here.
B) There are differences between brands but I have found that most of the differences are in bulb spacing, string length, and lighted length. So you want to stay with the same brand all the way through a project if any of these differences could be an issue. I haven't really seen a difference in quality except that I have never had products from target last.
C) I would not buy any lights for next year until just before or after Christmas unless they are on sale for near or less than a dollar each. After Christmas, especially a week or two after, the lights will be cheap. Last year I got lights for $0.69 each from Walmart although the pickings were kinda slim.
Thanks for the advice! I'm notsure if the house I saw is a member or not - I'm reluctant to just show up on his doorstep and start peppering him with questions. Maybe I'll drop him a note and offer to help with disassembly in exchange for some Q&A time... I am joing the 'Light Up Oho' website - maybe I'll run into some locals there.
I do have experience soldering and assembling circuit boards, but I could use a new soldering iron. the one you mention in your post looks like a real good deal for less than $50.
I've got to do a little drawing - maybe play with Vixen and a picture of my house - not sure if a 20' mega-tree and 8 little minis would look out of porportion by themselves in the yard or if a 10' would be better (it would certainly be simpler to start out with). On the other hand, I'm sure 10' would look much smaller outside from the street... Something to noodle on while I try to be patient. I am trying real hard to be responsible and all that and not just rush out and start buying stuff - but it's tough... 🙂
Welcome you might want to check out DLA RJ is making Smart string RGB it will save you on the amount of lights you will need to buy. Good luck on your venture
Vixen has a "preview mode" where you can draw your hopes and dreams onto a picture of your house. Then as you are doing your sequencing, you can see "how/where/what" the pieces will look like as they are lit up. Careful scaling of your drawings atop the image will yield a pretty good overall visualization.
Welcome to DIYC!
mschreuder wrote:Thanks for the advice! I'm notsure if the house I saw is a member or not - I'm reluctant to just show up on his doorstep and start peppering him with questions. Maybe I'll drop him a note and offer to help with disassembly in exchange for some Q&A time... I am joing the 'Light Up Oho' website - maybe I'll run into some locals there.I do have experience soldering and assembling circuit boards, but I could use a new soldering iron. the one you mention in your post looks like a real good deal for less than $50.
I've got to do a little drawing - maybe play with Vixen and a picture of my house - not sure if a 20' mega-tree and 8 little minis would look out of porportion by themselves in the yard or if a 10' would be better (it would certainly be simpler to start out with). On the other hand, I'm sure 10' would look much smaller outside from the street... Something to noodle on while I try to be patient. I am trying real hard to be responsible and all that and not just rush out and start buying stuff - but it's tough... 🙂
