Please verify my Pi...
 
Notifications
Clear all

Please verify my Pixel data connection layout

3 Posts
2 Users
0 Reactions
1,513 Views
ksmith247
Posts: 418
Topic starter
(@ksmith247)
Honorable Member
Joined: 14 years ago
[#27641]

This is my first year putting on a show and I decided to start with some pixels. I understand most of how they hook up, and that the PX1 works with the Pixels, but I am not quite for sure on the data connections when you have multiple runs. What I have is 10 vertical strands of 100 pixels going on my roof with 3 PX1 controllers. I have two options, which I believe one is correct, but I am not for sure which one. Can someone tell me if one of these is correct, or if I am off base on both?

The Red arrows are the pixels, and the blue lines are the data.

Pixel Layout Paint

2 Replies
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Picture 1 would result in the two strands connected to a PX1 having the same lights turn on (light 1 on the left strand will do the same thing as light 1 on the right strand etc.). Picture 1 could also give you problems because the PX1 is really intended to only drive a single pixel. In picture 1 you have it connected to 2 pixels. It might work. But it might give 'odd' results as well.

Picture #2 is a more normal layout. However, you will most likely exceed the max string length on the PX1 (100 pixels I think).

Martin


Reply
ksmith247
Posts: 418
Topic starter
(@ksmith247)
Honorable Member
Joined: 14 years ago

I thought that about picture 1, but I need to make sure I was correct in that thinking. The second one should work ok, because each row are 100 pixels, and I plan on putting two rows to one PX1. The max on the PX1 is 200 if I read correctly on the wiki.


Reply
Share: