bridge rectifier 1...
 
Notifications
Clear all

bridge rectifier 1amp 1000V

18 Posts
5 Users
0 Reactions
5,103 Views
Posts: 92
Topic starter
(@macshroom)
Estimable Member
Joined: 13 years ago
[#27631]

hi,
ive read the wiki and directions to take 4 small bits from a LED string controller box and make a rectifier from it . it looks too complicated and involved for me and I don't understand any of the math.
so I bought a bunch of these http://www.aliexpress.com/item/Free-Shipping-20-PCS-DB107-DB-107-1A-700V-Bridge-Rectifier-NEW/662995166.html 1 amp 1000V .
I mam planning to use them on strings of fairy lights,LED lights. 10m-30m long.

2 questions. first,are these appropriate rectifiers? I don't care if they are overkill, will they work properly?
2nd question . is there a wiki,or photos,or directions to use these instead of the method used in the current posts where you need to remove the 4 wee bits from the existing controller box and solder them together?

I was hoping by buying these , id save myself some work. but now im not sure .
I think ive read all the posts about rectifiers. either I didn't see anything on this or I didn't understand it enough to recognize that's what you guys were talking about .no joke, I am more confused now than before I started reading .all the math did me in .
I apologize if this is covered in a post that I missed or didn't understand .I tried to read an understand everything before posting a new thread.
does anyone have pictures?
thank you very much .


17 Replies
Posts: 92
Topic starter
(@macshroom)
Estimable Member
Joined: 13 years ago

the 10m are 100 bulb,20m are 200 bulb and 30m are 300 bulb .


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Are you planning to buy the Christmas / wedding fairy lights that have a multi function controller on them? If so, then you already have everything you need. I bought a bunch of those this year. All you have to do is short out the triacs that are inside the little controller (without cutting it off) and the strands will stay on 100% of the time at 100% intensity. It looks a bit odd to have the LED strand connected to the cheap little controller and then have the cheap controller going into an SSRez, but it works.

Now for the bad news. You cannot (easily) replace the bulbs in these strands and the strands are pretty delicate. They are made with 2 strand aluminum wire. Problem #2: After just a short period of use I am seeing many of the bases of the LEDs getting blackened. #3, I am starting to have bulbs die while I am still in the testing phase. I have very little confidence that these lights will survive the season. While they are very cheap (less than $7 / 100, they are VERY cheap and were apparently meant as a single use (one or two parties max) item.

Martin


Reply
Posts: 92
Topic starter
(@macshroom)
Estimable Member
Joined: 13 years ago

thanks Martin . do you have a picture of that? i know the fairy lights are poor quality.i have just under 2 km of them now . im very careful with them and they last 3-5 seasons if not handled too roughly. that's fine with me . ive paid $30 for strings of lights and shit happens . squirrels in the trees, mice in the garage during storage . in general ,things betting bumped around and stacked,the weather and wind. my neighbours dog took out over 200M worth running on my lawn and through the strung wires..so for me .it doesn't matter what i buy, they are only going to last a few years. so buying the cheaper ones and replacing them more often makes better sense to me .for now anyway .
if there is a way to make a full wave string without cutting and adding a rectifier that's great news.
id really appreciate it if you have a picture so i can see how its done . im not an electronics guy .
thanks very much Martin .


Reply
Posts: 92
Topic starter
(@macshroom)
Estimable Member
Joined: 13 years ago

i don't bother trying to replace the bulbs , i tie a knot in the two ends and leave it .strings with half the lights not working ,i use them in jack o lanterns and stuff like that .


Reply
Posts: 8
(@chris3453)
Active Member
Joined: 14 years ago
MartinMueller2003 wrote:Are you planning to buy the Christmas / wedding fairy lights that have a multi function controller on them? If so, then you already have everything you need. I bought a bunch of those this year. All you have to do is short out the triacs that are inside the little controller (without cutting it off) and the strands will stay on 100% of the time at 100% intensity. It looks a bit odd to have the LED strand connected to the cheap little controller and then have the cheap controller going into an SSRez, but it works.

Martin

Martin. Can you still control each of the light channels separately when you introduce the SSRez after the Multi function controller?

MacSHROOM wrote:

do you have a picture of that?

These are used alot in the UK and Aus/NZ a good guide is on the AUSchristmas wiki page http://www.auschristmaslighting.com/wiki/Bypassing_Multi_Function_Controllers


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Here are some pictures. As you can see in the top view, there are 4 diodes that make a full wave bridge rectifier. I have outlined these in red on both the top and bottom views. I have outlined the triacs in Blue. The black arrow on the bottom view points at the location where I use a solder blob to short out a triac. I do the same blob trick for all of the triacs.

Martin

FairyLightsTop
FairyLightsBottom

Reply
Posts: 92
Topic starter
(@macshroom)
Estimable Member
Joined: 13 years ago

that's really cool Martin .its good information to have . but , ive slept on it and I decided id really rather get rid of the box completely . its about water getting in them.i plastic bag all the little control boxes on all my lights.its a hastle but it works like a charm. I had one particularly horrible year.i got the bag trick from Natalie ,a friend of mine who was on Big Brother a couple times.i bag the boxes ,twist tie them, and the power cord connections get bagged as well . secure them in a position that the open part of the bag points down . condensation or water that gets in,drains out..it works great .
but the option of getting rid of the boxes completely and sealing it with heat shrink is better for me I think .less bulk and less stuff banging around .
unless I got the wrong rectifiers.or some other thing goes wrong . .then I may use your blob methed.the blobs in your pics , and Chris's wiki from Australia, do look pretty simple and less complicated than removing the parts and building a rectifier from it .thanks very much for your help.


Reply
Posts: 92
Topic starter
(@macshroom)
Estimable Member
Joined: 13 years ago

ive never gotten an answer for my original question . i know zero about electronics.
will the bridge rectifiers i bought work?
and, is their a photo or instructions on how to install them . from what i understood from the current wiki ,it says it can be done but only explains how to build your own .
thank you .


Reply
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago

They should work. The AC line connects to the two terminals marked with ~ and the LEDs to the DC side marked with + and -

/mike


Reply
Page 1 / 2
Share: