Yes, you can attach photos. I'm on my phone, but I think it's under advanced.
Sent from my Pixel using Tapatalk
IIRC, there is a minimum post count before you can attach photos. But I don't remember what that is 🙂 However, you can throw it up on dropbox, photobucket or ipternity for free and link it just as easy.
In your design phase, you need to isolate what technology you think you will or can deploy. There are two basic types of light controllers and lights (LEDs).
1. Dumb RGB. No its not an insult. Its what they are called. The advantages are the controllers tend to be a bit more basic. And the led strands are a little cheaper. The drawback is that each strand or group of lights (LEDs) all will be the same color as they all share the same R, G and B outputs from the controller. So if you make a mini-tree from dumb RGB, each group of strands will all be the same color. But you can put more than one group on a prop.
2. Pixels. Or Smart RGB. Each of the lights has a tiny chip in it that processes data given it from the controller. Due to that, each individual light can be a completely different color from any other on the string even though they all connect to each other and to a single output of the controller. Controllers for this sort of lighting can be rather complex, however, with a simple circuit, a Raspberry Pi ($35) can control 1800 or so of them. I very nice get-your-feet-wet startup.
And there is absolutely nothing says you can't deploy both technologies in the same display. Many many people do just that. But with a limited budget for a startup you really should focus on one type or the other, at least on your first go-around. Then once you got your elf legs, consider expanding or including different technologies as you see fit.
Also, it would help immensely if you could take some time and help us understand you and what your level is. Can you solder? Do you have the tools to do so? Any electrical or electronics background? Many of these areas are going to be eventually used by you at some point in your display construction. Also, would help if you could throw in your city/state in your profile location. Heck, we could be neighbors and not know it!
You will not save that much between "dumb" and "smart". But, there is a good chance you will regret getting dumb and then buying buying RGB down the road. So in the end you will be paying more. I've read lots of posts where people had regretted getting dumb. You can treat RGB as dumb, but you can't make dumb anything but.
Sent from my Pixel using Tapatalk
Phrog30 wrote:You will not save that much between "dumb" and "smart". But, there is a good chance you will regret getting dumb and then buying buying RGB down the road. So in the end you will be paying more. I've read lots of posts where people had regretted getting dumb. You can treat RGB as dumb, but you can't make dumb anything but.Sent from my Pixel using Tapatalk
They require different controllers which is why I made the suggestion to pick ONE to begin with. Which one is kinda up to what they want things to look like. And sometimes dumb rgb is easier to wrap your brain about. I don't use dumb RGB in my display. Not my bag. Others like it a lot.
As you can see, there are opinions all over the map about what to and not to use. Nobody is wrong in this discussion. Some are more steadfast in their conviction of going in one direction or the other than others.
I can give you a true-to-life example about using Dumb Nodes vs Smart Nodes. We purposely built 16 mini trees and 1 spiral tree using "Dumb Nodes". They do exactly what we decided we wanted at the point that they are used. They replaced trees that had "110v superstrings" (multiple single colored strings tied together) with a simple single string (per string) that would produce all the colors we could ever want. They will work in that mode for several years. They are also the only dumb nodes we have in the display.
Would I do it again, today? Knowing what is coming out from the board designers here, probably not. It is true that the cost comparison between dumb and smart pixels is not that great any more. The controllers themselves are the difference in price. Even that is being negated by advances in smart-node control.
"You can treat RGB as dumb, but you can't make dumb anything but" is very true. For flexibility, I'd go with smart pixels.
Then again, I want RGBAW or RGBVA lights, but I'll settle for RGB at this time due to the lack of sequencers supporting the newer, more capable nodes. Maybe next year.
Have fun figuring out what you want. It truly can be a blast when you hook them all up and see them light to your specifications!
