Picking spacing/ st...
 
Notifications
Clear all

Picking spacing/ style

9 Posts
4 Users
0 Reactions
3,410 Views
Posts: 44
Topic starter
(@camgeer)
Trusted Member
Joined: 10 years ago
[#45261]

I am new to this entire journey and have obtained a bunch of information from you guys , so thank you! I did have a couple questions before I order my pixels.

I plan on doing the outline of my newly constructed house (roof lines, 3 sides of both garage doors, and wrapping the posts on the front porch.) as well as getting a wreath and wrapping it, to hang on the attic window above the garage door. What I need answered is what people prefer to use for pixel spacing, and style. What I am stuck between is using WS2811 strings, with the mounting strips. or going with the C9 style nodes/covers.

I would like your input on 3" vs 4" spacing between nodes if I go with the standard strings VS the 12" spacing between the C9 style strings. Which is your favorite for outlining a house?

house front

8 Replies
Posts: 44
Topic starter
(@camgeer)
Trusted Member
Joined: 10 years ago

Viewing distance isn't that far. Maybe 50-60'. As for the window outlines... I may eventually do this. I have two little ones, and those two front windows are their bedrooms, so I dont want to do that for year or so due to that brightness, and their earlier bed times. I will probably outline the windows on the side of the house. I have 3 windows that are in my stairwell, and one in the office at the top of the stairs. This is the side that most people would approach my house from in my development, so it makes sense to light those up as well. Ultimately though, I plan on doing the roof-line, and a wreath, and then focusing more on some yard implements for next years display Such as arches, and candy canes. (I lucked out and got a bunch of varying sized metal candy canes for free this year)

Obviously using wider spacing stretches your money a little farther. But I am afraid that 1' spacing with C9 style may be too wide. By my figuring I would need about 1500 nodes for 3" spacing. This changes to 1125 for 4" spacing on the outlines with normal nodes. I am leaning towards your comment on you can always bunch them closer together, and thinking about just planning on ordering 4 or 6" spacing nodes to get me started, and then bunching them closer together if I dont feel they are dense enough. Then I will just order the extra strings next year when I buy for my yard implements.


Reply
Posts: 44
Topic starter
(@camgeer)
Trusted Member
Joined: 10 years ago
house side

Here is the side I was talking about for the windows.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

A little quick comment; be careful of spacing choice. Voltage drop will be an issue you need to deal with. 4" spacing is about 16 feet of wire where the 8" is 33 feet.
8" is perfect for 8" installation, but do not buy 8" for smaller spacing. Determine what spacing looks best for the aesthetic look you wish to achieve, then buy your pixels to match. And buy only 18 gauge and larger pixel wires (16 gauge is larger than 18 gauge.)


Reply
Posts: 44
Topic starter
(@camgeer)
Trusted Member
Joined: 10 years ago

From my reading I planned on purchasing 18awg 12v ws2811 nodes. You bring up a great point though, having the extra cable length will not help me with voltage drop.


Reply
Page 1 / 2
Share: