Help getting starte...
 
Notifications
Clear all

Help getting started...

26 Posts
11 Users
0 Reactions
8,710 Views
Posts: 6
Topic starter
(@mommy1210)
Active Member
Joined: 10 years ago

There is a good stretch of our yard that we could run dumb (the string of small spiral trees) but since we would also like to boarder our planters in this area, tied together in different sequence hopefully on one controller, it might be best to go with the smart pixels and the raspberry pi.

We do have tools and experience in construction, electrical, electronics/appliances, soldering and feel quite confident in that department.

We decided to reconfigure our design. Thinking we may have dreamed a little too big for our budget 🙁 I'm just so excited and there is so much I want to do- time to prioritize...


Reply
Protege94
Posts: 556
(@protege94)
Honorable Member
Joined: 10 years ago
Phrog30 wrote:With a budget like that, lightorama is surely not an option, so you really need a diy option. You have missed most of the presales, so you probably won't get the best prices for this year.

I would recommend diyledexpress, holidaycoro, or pixelsequencing.com for the pixels. I recommend a falcon controller. For software either vixen 3 or xlights. I personally prefer xlights. You can sequence without having any hardware.

Start there and get familiar with the products and then decide on what you want the layout on your house and yard to be.

Sent from my Pixel using Tapatalk

I disagree with this. 2016 was my first year doing a display and I went with Light O Rama and all in I am sure I was under $1,000 and I ran two 16 channel LOR boxes. (non pixel display)

But really it depends on what you like. I personally don't like pixels but some people do.


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
Protege94 wrote:I disagree with this. 2016 was my first year doing a display and I went with Light O Rama and all in I am sure I was under $1,000 and I ran two 16 channel LOR boxes. (non pixel display)

But really it depends on what you like. I personally don't like pixels but some people do.

Since it sounded like the op wants RGB, LOR AC controllers won't work. LOR RGB stuff is way overpriced. I disagree with your disagreement.😀

Sent from my Pixel using Tapatalk


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

um sending you a link in mail for you we have a guy in KAMUELA HAWAII who you might wanna get in touch with for any help or info he does a show with pixels and regular lights


Reply
Posts: 127
(@kreeve)
Estimable Member
Joined: 11 years ago

I did my first show in 2016 for ~ $1000.

I had 2 controllers

1. San Devices E682 16 port RGB smart pixel controller
2. Renard SS24 controller (for LED strings) These are AC lights

For my controller (E682) The controller needed to be within ~15 feet of the first RGB node for each string to work properly, otherwise there was flicker in the lights on that string. Because I only had one controller I had to modify my placement of things the first year, but it worked ok.

If you do go with the RGB smart pixels, (ws2811/ws2812) you do need to budget for the 3 wire connection cables between the controller and lights. Those you can not pick up locally. Be prepared for power injection ever ~100 RGB nodes.

The cost will depend in some part on how far apart your props are from each other for RGB nodes.

My display had pixabulbs on roofline, 2 leaping arches with RGB strip lights (ws2811), 4 spiral trees, a signing christmas tree face, a Holdman Star, and LED string lights on a train, in bushes and a tree. I had some LED string lights already on hand that I used for the bushes, train and trees.
It is amazing how cheap the LED string lights are getting at the local box stores.

So it is doable. I did it.

Kevin


Reply
Page 3 / 6
Share: