first year controll...
 
Notifications
Clear all

first year controller enclosure

4 Posts
3 Users
0 Reactions
2,395 Views
Posts: 10
Topic starter
(@arm166)
Active Member
Joined: 9 years ago
[#48497]

This is my first year build. Let me know what ya'll think, pro's and con's. I live in Texas and it is generally warm during Christmas, so some vents may be needed. Started as a Plano ammo/field dry box. Affectionately named Houston, cause if it does not go right, Houston we have a problem!

controller 1
controller 2
controller 3
controller 4

3 Replies
dsmjuggalo
Posts: 663
(@dsmjuggalo)
Prominent Member
Joined: 15 years ago

Where did you get the rj45 glands?

Sent from my iPhone using Tapatalk


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

You might want to look up some YT videos - type in 'CanispaterChristmas', yes, all one word. This guy is also in Texas and has built an enclosure quite similar to yours. He's also quite helpful and is willing to answer questions or at least point you in the right direction to get answers if he doesn't have them.


Reply
Posts: 10
Topic starter
(@arm166)
Active Member
Joined: 9 years ago

Yes, I cut the acrylic under the fan to allow air flow. I am considering putting 2 small vents on top of one side and 2 on the bottom of the other to allow air flow through the box.

The rj45 glands were obtained on eBay (Ethernet IP68 Protection M20 Stuffing Locknut RJ45 Waterproof) was the product title. Some reason it would not allow me to link it. They were around $30 for 8.

Canispaterchristmas is a world of information and knowledge. I have watched all of his videos even the non-light show ones.


Reply
Share: