Hello everyone, on the advice of another member I have started this thread. It is intended for people like me, who have absolutely no idea where to start. I purchased the Renard SS24 kit and starter kit from WayneJ and have been doing some research on how to use it. I have downloaded and installed Vixen and already have 2 songs sequenced. I have read the Renard Wiki pages on the controller also. What I seem to not be able to find is the actual process of getting the SS24 up and running. I have received help on another thread that is invaluable, so I hope that I can share that info here.
Before you flash the PIC, note the serial baud rate.
After you flash the PIC and remove the pickit:
Look at the list of serial ports on your PC and note what you have
Connect the cables and adapters to the PC and controller
Look at the list of serial ports on your PC and note which one is new. That is your controller serial port.
Turn on the controller
turn on Vixen
Configure a new controller on the vixen setup page to use the new serial port with the proper baud rate.
Save the setup
open a sequence and play it. Make sre the rx light blinks and the FE light does not blink.
Credit: MartinMueller2003
Update: I received a phone call from the man himself yesterday, WayneJ. Talked for about 15 or 20 minutes with him. He explained a few things to me and this gave me new confidence. I now know I can pull this off, thanks to the over the top customer support I have received. VERY,VERY impressed.
Thanks WayneJ.
After talking to WayneJ I plugged in the USB with the adapters provided and Vixen saw the COM port. I associated the port with the controller and it all seems to be working now. I still have yet to build the SS24 but I believe that I should have no problems from here on out. BTW all the PICs provided by WayneJ come pre-fleashed so I did not have to do that.
I am fortunate to live close enough to Wayne to actually meet him and see one of his displays. Great guy.
Kev7274 wrote:I am fortunate to live close enough to Wayne to actually meet him and see one of his displays. Great guy.
I really enjoyed meeting you as well! It's the people in the hobby that keeps me inspired!
