Controller Yard Sta...
 
Notifications
Clear all

Controller Yard Stand Recommendations

20 Posts
15 Users
0 Reactions
8,799 Views
Posts: 242
(@hockeyhunter1956)
Reputable Member
Joined: 13 years ago

I use 36" pieces of 1/2" rebar and drive them down in the ground about 12". I have 3/4" PVC mounted to the back of all my CG1500 and CG2000 boxes. This allows me to slip the CG box right onto the rebar. This also gives me room for snow depths that can at times be 18" in depth by the first of December.

IMG 0370
IMG 0368

Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
Hockeyhunter1956 wrote:I use 36" pieces of 1/2" rebar and drive them down in the ground about 12". I have 3/4" PVC mounted to the back of all my CG1500 and CG2000 boxes. This allows me to slip the CG box right onto the rebar. This also gives me room for snow depths that can at times be 18" in depth by the first of December.

I used 2 aluminum blocks on the back of my boxes. Drilled a 3/8" hole through the bottom one and halfway through the top one. Then I used a 3/8" aluminum bar for mounting. Really easy to get out of frozen ground. Just used pliers to spin bar breaking loose from frozen ground and it comes right out. Put a marking on rod to indicate how far to drive into ground. Had issue with bar flattening on top when driving into ground but solved that by using another block on top of bar to drive in. Worked like a charm.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 32
Topic starter
(@milehighsanta)
Trusted Member
Joined: 10 years ago
Hockeyhunter1956 wrote:I use 36" pieces of 1/2" rebar and drive them down in the ground about 12". I have 3/4" PVC mounted to the back of all my CG1500 and CG2000 boxes. This allows me to slip the CG box right onto the rebar. This also gives me room for snow depths that can at times be 18" in depth by the first of December.

This looks simple and easy.


Reply
Posts: 149
(@randomaker)
Estimable Member
Joined: 7 years ago
Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

Controller in ammo box. Rebar + PVC in the ground. Bungee cord holds the ammo box to the PVC.


Reply
Page 4 / 4
Share: