It's pretty obvious to me I've been bitten by the ferocious "blinky bug" as many of you have, and already I've inventoried the lighting I have, I've accumulated much more through after-Christmas sales and also aggressive dumpster diving. I now have a set of nine illuminated reindeer, one of which is going to get a red nose very soon 🙂 I've been thinking about RGB pixel-based arches, LED flood lighting, FM transmission, and wow, does this get out of control very quickly.
There are some things I view as important:
- Power - How do I run massive power to the lawn?
- Cabling - how do I avoid massive data cables from going through the basement window?
- Redundancy - What do I do if my Vixen PC goes "kaput"?
Power is actually pretty easy, and I've already laid the groundwork for that. I dug a trench from my house to a spot on the lawn that is underneath an unruly shrub, and come spring I'll be drawing four 4ga THWN through that of the usual colors - black, red, white, and green - and slapping a 60A subpanel on that to power the lighting and the controllers. I'll be using mostly LED lighting so 240V @ 60A should be enough, and 4ga THWN is rated for 85 amps so that's a decent margin.
Data Cabling isn't a big deal either, depending on what controllers are selected. Renards for example are daisy-chained serially and thus, only one cat5 from the basement to the lawn is really necessary, like so:
(Click to Enlarge)
Then I pondered the question of how many Renards can be daisy chained serially before things choke to death? That's easy to answer, there's a nifty chart on the Wiki:
(Click to Enlarge)
So at 57600 baud I could run a 50ms refresh and have 286 dimmable channels. Using a Renard 24 of some kind that would be 11 units per serial port. If that ever wasn't enough, my Vixen PC happens to have a dual-port RS485 serial card so half the renards could be on one port, half on the other, with the addition of another cat5 being drawn from the basement to the lawn. Not a big deal.
What happens if I add pixel type lighting and require ethernet on the lawn for drive say, an E682 controller? Okay, that's another cat5. Maybe two or three.
I started thinking about this and while sifting through my junkpile in the attic I came across a terminal server - this is a device that connects to ethernet and provides serial ports on the other side, allowing computers on the network to use those serial ports as if they were their own inside the computer, even though they aren't. I wondered if that would work with Renard type controllers.
So, I cobbled a stand-alone network like this using an 8-port 10/100/1000 switch:
(Click to Enlarge)
In the Vixen PC, I removed the RS485 card and deleted the drivers, then installed the virtual COM port drivers that go with the terminal server. Since the terminal server has four serial ports, I defined four virtual COM ports on the PC - COM1 through COM4. I made a weird Cat5 cable to connect the Renard I have to the first serial port on the terminal server, then set Vixen to use COM1. Viola - the Renard dimmed lights as before, except now that serial data is going over ethernet rather than direct-attach serial.
So, what does that buy me? Two things. By putting the network switch and terminal server on the lawn, I have four ports of serial and 7 remaining ports of ethernet on the lawn, all fed by a single cat5 from inside the house. Sneak that through some conduit and it's done.
Then I thought about how to avoid that single cat5 entirely - and while that's not something I need/want to do, I decided to try an experiment anyway. I grabbed two access points and set them to talk to each other in "bridged" mode, and ended up with this:
(Click to Enlarge)
And guess what, that worked too. I could have wired it a little differently and put the wifi AP on the PC directly, and put the network switch between the wifi AP and the terminal server - but the idea is passing Renard serial over ethernet over 54gb wifi works very well too.
So, my final "lighting network" will probably look something like this, with only two sets of wires drawn through the basement wall to the remote "box" that will have power and serial:
(Click to Enlarge)
That would be two conduits - One for a couple of cat5's and one for power.
Here's the other thing this idea potentially buys me - redundancy of the Vixen PC. Since the COM ports are now "virtual", if the Vixen PC dies all I have to do is boot up another PC with the virtual COM port drivers installed, load vixen, and load my sequence and I'm back in business. I don't have to move PCI cards around and deal with Windows remapping them differently on the replacement PC as compared to the original PC.
I made that even easier by rolling together a "live" version of XP on a USB stick, with the virtual COM port driver loaded and configured, along with Vixen and my test sequence. Any PC that can run XP instantly becomes a Vixen PC just by booting on the USB stick.
I'm not sure if this is useful to anyone, but I found it fun to do and it facilitates my thinking about a centralized "box" on the lawn that provides power and data to holiday lighting.
Holy cow - I thought that I got bit by the bug - something tells me you live further south than me because the bugs down south are bigger!! 🙂 That is an impressive setup. Here I am thinking about 3 Ren 24s... you have plans for 11!!
Here is the one thing that I see as a possible minus to your plan. It does a great job of getting the power/cables out of the house to the center of the lawn, but you still have to stretch from there all around (back to the front of the house, etc). Alot of it depends on what your plan is for the controller placement!! You could still have power and rs485 cables running all over the place. Maybe split that power line? Put a smaller panel where you have it and another close to the front of the house?
I personally think it's a great plan, or the start of one at the very least! If everyone had this kind of forward thinking, we wouldn't have to answer a single question around here..... 🙂
Good luck!
Nick
You can also do this without the terminal server. You can use a DMX Bridge or even the E682 instead. The E682 at this time only supports DMX out, but the 6 Port DMX Bridge will do Renard and DMX.
Edit (More Info):
Both the DMX Bridge and E682 use a E1.31 input so you could also do away with the virtual COMM ports and use the same output plugin for everything.
You're right, this doesn't address the potential knot of wiring on the lawn for power and data.
I was kind of thinking no matter what I do, the lawn's going to be a mess anyway. I was just trying to minimize what gets run back to the house because any kind of permanent installation is conduit plus holes in the house for that conduit. More conduit, more wiring, more holes. With all the stuff immediately surrounding the house (shrubs, tree roots, french drains, utilities that go in strange directions), running conduit underground to the house is a challenge - there aren't many places where I can draw it all in logically, so I found one spot that's reasonably clear and just trenched out for one big power conduit and one smaller data conduit.
I figured it's better than what I've been doing for years - tossing out extension cords from each window, so they're all on their own circuit (shared with the room the window is in of course) and that makes for a cold December with 7-9 windows not closed all the way. Between the hassle of sticky windows that don't cooperate, and the month-long whining and complaining about how cold it is from the windows being opened a half inch, a box on the lawn with everything in it seemed far more appealing.
Plus, you should see what I have to trench. My lawn is grass growing on top of about an inch of topsoil, but underneath is about six feet deep of big rocks and clay. I've broken more shovels... but that's another story 🙂
Here is one of my "box on the lawn" designs, one of many.
Found something very interesting while looking up a couple items you mentioned... But this could come in handy for us in our 'hobby' 😉
gizmohd wrote:Found something very interesting while looking up a couple items you mentioned... But this could come in handy for us in our 'hobby' 😉
If you're going to go with that, why not just go wireless with the xBee?
Blank in protest of indiscriminate user bannings!<!--Software I wrote or modified that I hope might help you out:
Test your Renards on the bench with the Simple Renard Tester Application V1.3 with the Source Code for you geeks out there.
Vixen Channel Mapper Version 1.0.215.72: Move, rearrange, copy and more on all of your sequences with just a push of a button. Helps when you grow from your current channel count, rearrange your layout or use other sequences people have given you. - See this thread on how to use it.
Support for above tools: john at rosefish dot com
My 2012 Sequences in one file -->
<!--To get the codes to program your TIR litght fixture, get TIRDrop v1.0.3
Home Page: Blinky-Flashy.com -- Facebook page: 1875 Blinky Flashy
[/SIGPIC]
Signature picture courtesy of air_run
-->
Valid argument.. 😉 Just pointing it out to everyone.. Trying to be a good steward
Another consideration is humidity and temperature. Since you didn't update your profile with your location, I don't know what type of freeze zone you are in. Has anyone looked into how the networking components (routers, switches, etc) perform in the freezing elements and high humidity/high temp areas?
also wireless is an option. You can also go DMX instead of Renard. There are all sorts of wireless DMX components floating around. I"d love to see an E682 with a wireless E1.31 receiver option. Now that would be the holy grail.
Michael

New for 2016: Getting my ESPixel network to function, 4 HDPE Pixel Arches, Pixel matrix on tree trunks. PIXELS!!!FACEBOOK: https://www.facebook.com/GothambeatProductions?fref=ts
Gotham Beat Productions LLC
dlovely: I glanced at, then turned away from DMX because I had assumed it to be expensive, only because the average 4-channel DMX dimmer pack is about $100-$300 depending on the model, wattage capability, etc. My doing that was before I discovered this website/forum and all the DIY projects that you all share with each other. E1.31 if I understand it correctly is the DMX protocol passed over a computer network of some kind, typically Ethernet?
Most of the reason why I chose to use a terminal server for this test is because I got stuck with two of them a few years ago due to a customer cancelling a project. I have the smaller 4-port I used for this test and a rackmount 16-port that's still in the attic. The four port was for a fax server, and the 16 port was for employee dial-in to their network. Anyway, they were in the attic, unloved.
I will read about the 6-port DMX bridge and revisit DMX overall. Merging different types of controllers for different purposes and features is never a bad thing. One thing I've always loved about DMX (in general) are the plethora of light boards to choose from. I generally prefer knobs and sliders over mouse clicks anyway.
macebobo: Your Simple Renard Tester Application is great! I used it to test my new-to-me Renard for a while before my RS485 card arrived.
michaelc: I live a couple hours north of you in NJ. I personally wouldn't put circuit boards outside in the weather without protecting them, and for that I use 3M's 1700 circuit board sealant. It comes in $15 spray cans if I remember the price correctly, but I haven't bought any in a long while. It's a great product as it seals the board so that the copper traces and solder joints aren't exposed to humidity and therefore do not corrode. It's easily picked off for board repair, and survives 300+ degree temperatures from heat sinks and the like, so I spray both sides of the boards. I have an old Aruba access point that's been outside in the rain, baked in the sun, beaten hard by wind (it dangles, the mount's broken) but still works probably because I sprayed the insides with the 3m stuff when I installed it many years ago. It's good stuff.
frederic wrote:dlovely: I glanced at, then turned away from DMX because I had assumed it to be expensive, only because the average 4-channel DMX dimmer pack is about $100-$300 depending on the model, wattage capability, etc. My doing that was before I discovered this website/forum and all the DIY projects that you all share with each other. E1.31 if I understand it correctly is the DMX protocol passed over a computer network of some kind, typically Ethernet?Most of the reason why I chose to use a terminal server for this test is because I got stuck with two of them a few years ago due to a customer cancelling a project. I have the smaller 4-port I used for this test and a rackmount 16-port that's still in the attic. The four port was for a fax server, and the 16 port was for employee dial-in to their network. Anyway, they were in the attic, unloved.
I will read about the 6-port DMX bridge and revisit DMX overall. Merging different types of controllers for different purposes and features is never a bad thing. One thing I've always loved about DMX (in general) are the plethora of light boards to choose from. I generally prefer knobs and sliders over mouse clicks anyway.
Most the Renard controllers can run DMX firmware on them. Yeah professional DMX stuff is very costly, but this is the DIY world. The Renard DMX functions a tiny bit different than normal DMX controllers, this is the Renard DMX eats channels where most other DMX controllers pass every channel down the line. If you know this when planning out your display its not really an issue, and hardware modifications can change this if you have to.
If you have the terminal servers then use them! I just wanted to suggest something else as some of those severs cost a lot of cash. I used a Sena serial device in the past and had a few latency issues with it and that lead me to the E1.31 bridge world.
dlovely wrote:Most the Renard controllers can run DMX firmware on them.
I'll have to be sure to pick units that can then so I don't select those not in "most", as would be just my luck 😉 Thank you for the tip!
dlovely wrote:The Renard DMX functions a tiny bit different than normal DMX controllers, this is the Renard DMX eats channels where most other DMX controllers pass every channel down the line. If you know this when planning out your display its not really an issue, and hardware modifications can change this if you have to.
So, if I have two 24 channel renards in series, feeding them DMX, the first renard takes the first 24 DMX channels of data and passes the second 24 to the second controller?
As long as Vixen or whatever is sending the DMX data "knows" there are 48 channels downstream, this isn't an issue, right?
dlovely wrote:I just wanted to suggest something else as some of those severs cost a lot of cash.
Yes they do. If I didn't have them, I wouldn't even consider buying one. I just stuck with these so they made for a fun experiment. I'm not sure I'll be using them in the final arrangement. Knowing that the ideal of virtual com ports over a terminal server works with Vixen and Renards does offer yet another choice in how to cable things up.
dlovely wrote:I used a Sena serial device in the past and had a few latency issues with it and that lead me to the E1.31 bridge world.
Really, because those units are pretty nice overall. Granted, I only ran one renard on one port - that's not a lot of data as compared to a whole string of renards.






