1st Mega Tree
 
Notifications
Clear all

1st Mega Tree

17 Posts
13 Users
0 Reactions
10.1 K Views
Posts: 17
Topic starter
(@gocwbys)
Eminent Member
Joined: 10 years ago
[#44885]

I am looking for some advise...

Building a Mega Tree - Thinking 800 Pixels (WS2811) - 16 Strands at 50 each.

Looking to purchase a new controller. Thinking about Sandevices E682

Looking to use Vixen 3 software.

This is all very overwhelming!!!

Where to i purchase the Sandevices E682? I can find pixels and power supplies easily.

I currently have a small pixel matrix of 350 pixels using a T1000 controller with LEDEDIT - Not happy with it.

Any help would be GREATLY appreciated!

gocwbys


16 Replies
JP90
Posts: 376
 JP90
(@jp90)
Reputable Member
Joined: 19 years ago
gocwbys wrote:I am looking for some advise...

Building a Mega Tree - Thinking 800 Pixels (WS2811) - 16 Strands at 50 each.

Looking to purchase a new controller. Thinking about Sandevices E682

Looking to use Vixen 3 software.

This is all very overwhelming!!!

Where to i purchase the Sandevices E682? I can find pixels and power supplies easily.

I currently have a small pixel matrix of 350 pixels using a T1000 controller with LEDEDIT - Not happy with it.

Any help would be GREATLY appreciated!

gocwbys

Welcome aboard, if you take things one step at a time, as you are doing, it won't seem too overwhelming and remember this forum is a great place for help when you need it. I can give you some info on the Sandevices, I am running 4 and a lot of people here are running a lot more the I am and I have not had one problem with them. There are also a few other good controllers out there and I am sure you can get some info from the people using them. here is a link to Jim's web site to order the Sandevices controllers and he does have his phone number there if you need help or more information.
Gary

http://sandevices.com/aboutus.html


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

If you can't find a used one on here or the green site, then you can purchase a new one (Kit or assembled) from http://www.sandevices.com/index.html


Reply
Posts: 205
(@barlav)
Estimable Member
Joined: 11 years ago

Welcome and congrats for taking this on. I was starting out last year at this time with the same plan. 16x50 mega tree with E682 etc.. Feel free to check out my thread of the tree building http://doityourselfchristmas.com/forums/showthread.php?42817-2016-Mega-Tree-With-Public-Remote-Control


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

You have many things to consider, preferably before you buy anything.

First is the controller. I know you say you want an E682. Why? Why that specific controller? If you are looking at something you can kit build, then thats a reasonable choice. However, if you can spring about $20 more on the controller, you can get a Falcon F16v2 very shortly (end of the month) or a v3 later in spring. The Falcon is a far better controller with way more capabilities than the 682. Its well worth more than the $20 difference to be quite honest. Do you need that capability for just a megatree? No, quite unlikely. However, the long term payout is quite likely very much a "I wish I had" scenario. Many people are happy with the 682. Many are happy with the Falcons. I am just saying you might want to look into your options before comitting to one now.

Next is software choice. Vixen is not bad at all. Its a solid package and, for me, was pretty easy to learn on. However, I would recommend you also look at xLights. Its learning curve is a bit steeper I will admit. But, its ability to deliver quality on your lights is definitely worth the learning investment. I started with Vixen. I used xLights last year so I have personally used both. And, if I had to start all over again, I would choose xLights to begin with. Both have progressed since I began with each one, but the rate of progress is substantially greater on xLights. Its also WAY easier to share sequences from others and get them working on your layout with xLights than it is in Vixen. If I did something on my 24x60 megatree in vixen you would put great effort to get it to run on your 16x50 and thats not the case with xLights. There are many free and for-purchase sequences available for xLights and that is not the case with Vixen. Looking at other's sequences is a very good learning tool which isn't very easy to do in Vixen. All I am saying is try both. Its ok to install both and try both at the same time. Then choose which you would like to go forward with.

Have you decided on a method of supporting your strings? I would highly recommend you ignore the copies and knockoff strips and go with Boscoyo pixel strips (boscoyostudio.com).

What about support pole system? Have you looked into how you are going to hold the thing up? If not, look through the many ideas here on the forum. Also, look into the JUMP and ASAP pole systems by Walter Monkhouse. And the Portable Hole bases also by Walter. (These are things you build, not buy)

Another thing you may wish to look into is the Christmas Expo coming up this summer. You can learn a heck of a lot from the seminars there as well as shaking hands and seeing faces of many here as well as vendors you might be considering buying from.


Reply
Page 1 / 4
Share: