New Controller / E6...
 
Notifications
Clear all

Sandevices E682 v/s HinksPix16 Poll is available till Feb 03, 0530

  
  

New Controller / E682 vs HinksPix16

40 Posts
19 Users
0 Reactions
13.5 K Views
Posts: 17
Topic starter
(@gocwbys)
Eminent Member
Joined: 10 years ago
[#44888]

Hello all. Getting ready to purchase my first "big boy" controller.

Should i purchase the Sandevices E682, or HinksPix16

I can get both for about the same price. HinksPix may be about $20 cheaper (not that it really matters)

Please let me know your thoughts!!! Thank you all!!!


39 Replies
Posts: 535
(@mharnish)
Honorable Member
Joined: 12 years ago

The HinksPix is so new I don't think you will get too much feedback on it yet but the e682 has been around for a while and is very solid. The e682 does not have some of the features and does not scale a much as something like the Falcon boards but they are great cards. I have been running 6 e682's for a couple of years now and have not had any issues with them. The V5 firmware should update some of it's limitations but it is still in Beta and has been for almost a year so I am not sure how much time is being dedicated to it. I think sales have dropped off with the Falcon boards becoming the Gold standard of controllers right now so development may be suffering due to that.

If you are looking to build it yourself and want to stay inexpensive the e682 is great if you are going to buy it already built then I would seriously look at the Falcon F16V3 as the price delta is not that great and the Falcon is the best board around right now. If you are building it yourself the price of the e682 cannot be beat so if you are on a budget I would not hesitate to pick one up.

You can also look for used e682's if you are trying to stay inexpensive as a lot of people are selling them to buy the Falcon boards right now.

I have e682's, Falcon F16V2's, Alphapix, and PixLite MkII boards and the Falcons are the best followed by the e682 boards. The Alphapix from Holidaycoro would be third and I would not even consider another PixLite MkII as I have 2 of them and pulled them out of my show this year due to problems with ports going bad and fuses blowing. Never had any issues with the other 3 vendors.

Hopefully someone can shed some light on the HinksPix for you. I think if you are using HLS for sequencing the HinksPix would probably be the way to go as he makes the boards and HLS software so integration will be great but if you are using xLights the Falcon board is the way to go since David Pitts (Falcon) has been working with the xLights team to add features like autoconfiguration of your Falcon board direct from xLights by using a send to controller button. I'm sure there is more to come as well.

Hope that helps.

Mark


Reply
Posts: 535
(@mharnish)
Honorable Member
Joined: 12 years ago

This will probably be useful as well:

http://nutcracker123.com/nutcracker/rgb_controllers/

It is a full comparison of controllers.


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago

My vote is neither, I would go with a falcon.

Sent from my Pixel using Tapatalk


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
Phrog30 wrote:My vote is neither, I would go with a falcon.

Sent from my Pixel using Tapatalk

Couldn't agree more!


Reply
Page 1 / 8
Share: