sequence program sc...
 
Notifications
Clear all

sequence program scheduling problem

12 Posts
6 Users
0 Reactions
4,976 Views
dnesci
Posts: 563
(@dnesci)
Honorable Member
Joined: 19 years ago

This is puzzling. Vixen 2.0.9 places only the sequence name in the program. The audio is tied to the sequence. If you open up a sequence in notepad.exe and scroll down to just after the channel numbers and names you should find a section " <Audio filename=". You could also search for "filename". It will list the name of the audio file attached to the sequence. If it is not as you expect, reopen the sequence in Vixen and reattach the correct audio file. It should fix the probem.

If the name is correct, then try to play the audio file only and see if it is correct of if a glitch has renamed your audio file.

Don


Reply
Posts: 315
Topic starter
(@sky-lights)
Reputable Member
Joined: 17 years ago

Don , when I close the PROGRAM and open just the individual sequence , it plays fine . Its only when the PC sits from the end of one day's program running until the beginning of the next , that this weird jumbling of music/sequencing occurs .
It still is happening , I just have to do a hard reboot everyday right before I start the PROGRAM


Reply
rokkett
Posts: 441
(@rokkett)
Reputable Member
Joined: 17 years ago

What happens when the audio length doesn't match the sequence length? Does it just cut if off and start the next sequence?

Here is a crazy test. Once it messes up, try playing the sequence outside of the program again - does the wrong audio play then? If yes, try playing the audio track outside of Vixen - is it still the wrong audio?


Reply
Posts: 315
Topic starter
(@sky-lights)
Reputable Member
Joined: 17 years ago

Ok , when the wrong audio for the sequence plays , it runs thru till the end of sequence ( which happens to be the longer in time length of the two )
And , when I stop the scheduled PROGRAM from running and start just the sequence , the sequence runs fine .


Reply
dnesci
Posts: 563
(@dnesci)
Honorable Member
Joined: 19 years ago

Sky-Lights, have you figured out the issue? If not can you change the order of the program so that you have a different last song. I'm wondering if the last song is messing with the timing. Your program is 1,904 seconds. The show is 18,000 seconds (5 hours). This means you will repeat 9 times and have about 27 minuites left. It should play out the entire last repeat of 31+ minutes. This means it should end around 9:34. If it is not, It may still have the last song loaded when the next program launches.

I had some problems with this version of Vixen. What I did to cure the problem was have the computer reboot automatically at 3 am everyday. This is done by setting the scheduler in windows to shutdown and reboot. It Vixen is put in the startup folder, it will restart when the machine is booted. This may not be the most elegant solution, but it does take care of memory leaks and resets the scheduler.


Reply
Page 2 / 3
Share: