Ok , not really sure where to put this ... so ... I just guessed to put it here .
Anyway , Am having a weird problem going on that was NOT happening before and its really starting to bug me as to WHY ?
First the low down -
Running Vixen 2.0.9.0 on desktop with WIN XP Pro SP3 with 2 gig mem and 2.8 Pentium 4.
Have a PCI add on serial card which supplies 2 xtra ports ( can be used as either 232 or 485 and I am using them as 485's .
I have 12 sequences programmed in and scheduled . Starts at 4:30 in the afternoon and ends at 9:30 PM . Now , its not the time at either start or stop that has gone screwy , but here is what just started recently happening and I can not find out why . I literally have to do a hard boot to get it to come back to normal . ( and the screen-saver is turned off , the HD's and monitor is ALWAYS ON , and no hibernation ) This has only JUST recently started and is really getting to me , since I usually do not get back home from work until AFTER the timer starts .
So , now after you have all the details . here is the problem/situation ...
The scheduled program starts when its supposed to , there is no glitching of the lights ( using all REN's ) , BUT .... the sequence that starts is correct for the actual sequence in line , BUT , the music that supposed to accompany it , is for the NEXT sequence . Somehow , VIXEN decides to use the music for the NEXT sequence in line .
Example -
1st sequence in line is named " my beginning intro" ( yeah , I know , very creative title - lol )
and the 2nd in line is named Jingle Bells Frankie .
Now , what happens is when the MY BEGINNING INTRO starts , the music for JINGLE BELLS FRANKIE plays and it continues thru the rest of the sequences this way , untill I stop it and do a hard boot of the PC . Then , it does the scheduled programming correctly . ( restart current timers )
Any ideas ? Could it be hardware problems ? The only thing I could think of was memory stick problems and already tried that , by switching sticks out with my PC downstairs and it did not solve the problem .
So ....
anybody ?
On your Scheduler
Are you using a single sequence called "my beginning intro" followed by a program that contains your sequences?
what timings are set on the scheduler?
No .
My program consists of the following sequences without any singled out sequence prior to the program
( we will use the alphabet rather than each individual sequence name )
1) A
2) B
3) C
4) D
5) E
6) F
7) G
( and so on and so on till you get thru 10 sequences .
they are all set to use the same PROFILE and thats also the same profile that they were each created with . There are no seconds of cross fading . ( 0 )
the timings are set for 4:30 pm to start and to end at 9:30 pm . ( see pics below )
My program name is SHOWTIME ( I know , another very creative name - 😆 )
Well, I'm stumped..
Only suggestion I can think of is to set Windows Task scheduler to reboot your system at 9:45pm each night to clear any memory issues.
have you tried to adjust your program to use individual profiles? Something to try.


