Selenium rectifier ...
 
Notifications
Clear all

Selenium rectifier ?!?!

25 Posts
12 Users
0 Reactions
9,159 Views
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Lutefisk smells better! 😀


Reply
rice66
Posts: 246
(@rice66)
Reputable Member
Joined: 19 years ago

Yeah they really smelled when they "expired" usually caused by a short circuit somewhere in the B+ supply(the ones in the old b/w televisions likke the Philco models and the Dupont brands.) The schematics can be found in a SAMS booklet number 987!!
Usually a electrolytic capacitor that filters the B+ supply, and more commonly the input filter capacitor. Normally found in a alumimum can which housed three capacitors . Usually something like 150mfd @ 300vdc,150mfd @ 475vdc, then a lower one about 50mfd at 150vdc.. The the chemicals in the capacitor would also spew out and cause an additional stink. These capacitors broke down due to spikes in the input ac lines and the resultant spike in the output dc. Most of the older capacitors, in order to have a higher voltage rating used the deadly (PCB,s). Now that dates me
Rice66


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
Good heavens, guys, we took a real trip down nostalgia lane, huh!

B+ and triple electrolytic capacitors in a can and selenium rectifiers and 5U4GY tubes. How about some 35Z5s and 6L6s and 12AU7s?

The wonderful sights and odors of the good ole' days. Or, as my son used to say: "Back in the olden times!"

How many of you have charged up a large electrolytic capacitor and left it laying around for some unsuspecting tech to pick up? How many of you have smoked and blew it through a tube into the equipment some one was working on?

Shall we go further?


Reply
Posts: 268
(@jakeleg1969)
Reputable Member
Joined: 17 years ago

I can still remember when Plate Voltage had nothing to do with dishes...

Jerry in Louisiana


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
Yeah, and a drip pan for a grid leak on a valve had nothing to do with your plumbing.

Or an OHM was an Englishmans 'ouse?

If you had bias you weren't prejudice or racist?

Just because you had a cathode ray tube didn't mean you were from outer space?

And if want to go way back, a tickler coil wasn't something you took to bed?


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago
IdunBenhad wrote:How many of you have charged up a large electrolytic capacitor and left it laying around for some unsuspecting tech to pick up?

Are you kidding? Set it sideways on the table and let it roll off. Guaranteed they'll catch it every time.:p


Reply
Posts: 485
(@sjwilson122)
Honorable Member
Joined: 19 years ago

LOL....oh the fond memories. We used to charge them up and toss them to some unsuspecting person in my electronics class.


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

Reminds me of a quote about the passing of Electrical engineers..

.. they don't decay, they just lose their potential. 🙂

IdunBenhad wrote:Hi:
Yeah, and a drip pan for a grid leak on a valve had nothing to do with your plumbing.

Or an OHM was an Englishmans 'ouse?

If you had bias you weren't prejudice or racist?

Just because you had a cathode ray tube didn't mean you were from outer space?

And if want to go way back, a tickler coil wasn't something you took to bed?


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago

I'd almost certainly suggest this was a case of poor translation between cantonese and english.. I've seen it many times.. translate.google.com is useful, but not accurate.


Reply
rice66
Posts: 246
(@rice66)
Reputable Member
Joined: 19 years ago

Not to mention degaussing the old round face color picture tube, converging dots r g b yuck, moving the magnets on the neck of an old b/w picture tube to deflect the elcetron stream, moving tabs on the neck of the yoke !!
rice66


Reply
Page 2 / 3
Share: