Hello
This year i will be running 1 Renard ss16 and 2 Renard SS24. These plug into the outlet on my porch. I believe this outlet and the outlet in the garage are on the same circuit. Over the summer I added a freezer in my garage that says it is 5amps. I am wondering if I am going to have a problems with circuits getting blown.
In my opinion my display is not that large. I have a mix of LED and incan lights.
here are a few details...
3 x Arches (7 sections on each arch consisting of 100 strand incan)
Spiral Tree (16 strands of 100 count incan)
6 strands of 70 count LED m5 lights
6 strands of 100 count incan
roof line consists of 2 strands of c6 costco led
2 strands of c9 costco led
tree covered with 5 strands of 100 ct incan
3 strands of costco (ge) led icicles
Those are the biggest and most of the items in my display.
What do others do as far as plugging stuff in? Do you go the route of having a dedicated circuit in your breaker box?
Thanks
In the past, many folks did not just have one dedicated circuit, but frequently had additional breakers installed to handle the load of their lights.
In almost all cases, each light string should have some indication of how much current it uses. The LEDs will be much less, and depending on the model and year bought, many of the 100 ct incan minis will pull .3 to .8 A per string.
It's best to not load a given circuit breaker more than 80 %, but you'll get varying opinions on that.
Even tho the freezer says it pulls 5A, it will pull more when the compressor starts up, and your lights will most likely dim slightly when that happens.
It's highly recommended that you have a separate circuit just for the lights, and that you size it correctly.
Another low cost option is to buy a power line monitor. They cost around $20-30 and will tell you how much current and power is being used by what you plug into it. One model is called "Kill A Watt". That way you can tell how much current each fixture or controller is using, and know for sure if you might be getting close to tripping the circuit breaker.
