Hopefully somebody can help me.
I have a GFI outlet on a 20A circuit, it is the only outlet on that circuit. The outlet was dead, so I replaced it. But the new outlet doesn't work either, when I push in the reset button it doesn't stay in. Can anybody help me? I connected the 3 wires on the new outlet exactly like they were connected on the old outlet.
- Martin
msiebri wrote:Hopefully somebody can help me.I have a GFI outlet on a 20A circuit, it is the only outlet on that circuit. The outlet was dead, so I replaced it. But the new outlet doesn't work either, when I push in the reset button it doesn't stay in. Can anybody help me? I connected the 3 wires on the new outlet exactly like they were connected on the old outlet.
- Martin
Do you have an outlet tester you can plug into the outlet to see how it reports the wiring? They are less than $5 and well worth having.
Also, you sure a breaker isn't flipped for that run?
Short and badly typed since written from my phone...
toozie21 wrote:Do you have an outlet tester you can plug into the outlet to see how it reports the wiring? They are less than $5 and well worth having.
I don't have an outlet tester, do places like Home Depot or Lowes carry them?
The breaker wasn't tripped. I shut the breaker off while I replaced the outlet, then turned the breaker back on. I hit the test button on the outlet and heard it click, but nothing since that. I checked the breaker after that and it was still on.
msiebri wrote:I don't have an outlet tester, do places like Home Depot or Lowes carry them?The breaker wasn't tripped. I shut the breaker off while I replaced the outlet, then turned the breaker back on. I hit the test button on the outlet and heard it click, but nothing since that. I checked the breaker after that and it was still on.
Yeah, they should both have it. My lowes keeps it near the wire strippers, electrical tape, zip ties, and things of that ilk.
I just helped a friend work through his GFCI problems on the phone last weekend, so we should be able to get you up and running. Is there anything downstream from the outlet, or is the outlet the end of the run?
Short and badly typed since written from my phone...
toozie21 wrote:Is there anything downstream from the outlet, or is the outlet the end of the run?
That is the only outlet on the circuit. I will run down and get a tester tonight and let you know what it shows. Thanks for the help!
msiebri wrote:That is the only outlet on the circuit. I will run down and get a tester tonight and let you know what it shows. Thanks for the help!
No problem. If the outlet tester shows nothing, I would take the outlet out of the box and probe the black and white wires with your multimeter and make sure you are seeing 120vac (if not, you might have a cut line or broken connection up stream).
Be careful with this last step as you are probing live wires. If you take your time and do it carefully, you will be fine, just don't rush and accidentally jam a screwdriver in there or something....
Short and badly typed since written from my phone...
Ok, here is a picture of the tester I bought. $8 at Lowes.
I plugged it into that outlet and pushed the red button, no lights came on. I did notice there is a very small green light on the bottom left corner of the outlet, that light is on.
I'll try testing it with my multi-meter tomorrow morning. Too dark and cold to try that tonight...
- Martin
Did you check if the wiring is connected to the correct hot and neutral ? there is a cascaded(load) terminal connection use to protect the non GFI down the line, make sure your wires are not connected to that, should be on the line terminal side.
pakeonoahu wrote:Did you check if the wiring is connected to the correct hot and neutral ? there is a cascaded(load) terminal connection use to protect the non GFI down the line, make sure your wires are not connected to that, should be on the line terminal side.
This was what screwed up my buddy last weekend. He wired it "just like the old one", which apperently wanted the upstream/downstream reversed from the new one. He too would get a faint glow when backwards. When he reconnected the right way he said he only got the red light on the GFCI and no juice. At that point I asked him if he reset the GFCI..... Got a free lunch out of it [emoji6]
Short and badly typed since written from my phone...
pakeonoahu wrote:Did you check if the wiring is connected to the correct hot and neutral ? there is a cascaded(load) terminal connection use to protect the non GFI down the line, make sure your wires are not connected to that, should be on the line terminal side.
There was a piece of yellow tape on both the old and new outlets that was covering two of the terminals. It said those were for cascading to other outlets. I made sure not to use those terminals, I left the yellow tape over them.
I'll check this morning to make sure I have the hot and neutral on the right sides, and I will measure with my multimeter.
