Let's say I want to build an SSR that can detect whether or not the load is connected and working. I think it might be handy to have an SSR report back when the lights connected to it fail.
I'm thinking a current sensor of some sort is the appropriate solution.
What kind of electrical widget would I use for this application? Is a Hall Effect sensor the right part?
Couldnt you just mount a photo sensitive cell by the first light in the string?
I just look outside to make sure mine are working 😆
Sean
I'm just looking for electronics projects to keep me entertained for the next few months. 🙂
NogginBoink wrote:I'm just looking for electronics projects to keep me entertained for the next few months. 🙂
you can help me if you want 😆
you can help me. I am moving to San Angelo TX and starting up a display. I will need lots of help.
All the dimming equipment I've dealt with use inductive current sensors on each output.
This issue you will run into is if you have 5 strings of lights and one isn't working your circuit will report that the output is OK when it isn't. It would be nice to know that you have something burned out even though the rest of the strings are OK.
On a pro dimmer rack once you plug in all your loads/lights you put the system into "record mode." The dimmer rack then sets the loads to 100, 75, 50, 25, and 0 and records the current at each intensity. If you get a burn out like I described earlier the system would report a change of load (current) on that circuit. That then lets you know that there is something in the yard that needs your attention.
I have not tied it for any Christmas applications, but I have used a mini-CT that powers a single LED to indicate that current is flowing. The mini-CT has a window that you can pass a single conductor, about 12AWG through. I don't remember the amount of current required to light the LED, but it was not much. Some of you electronic guys may be able to remove the LED and do some sort of comparison circuit instead. I will try and find a link to the manufacturer of the parts.
